FESTO VMPA2-M1H-J-PI 537953 Solenoid Valve
The FESTO VMPA2-M1H-J-PI, part number 537953, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO VMPA2-M1H-J-PI 537953 Solenoid Valve
The FESTO VMPA2-M1H-J-PI, part number 537953, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Valve function: 5/2-way, double solenoid.
- Type of actuation: Electrical.
- Valve size: 20 mm.
Technical Data
| Brand | FESTO |
|---|---|
| Model | VMPA2-M1H-J-PI |
| Part number | 537953 |
| Product type | Solenoid Valve |
| Valve function | 5/2-way, double solenoid |
| Type of actuation | Electrical |
| Valve size | 20 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 670 l/min |
| Operating voltage | 24 V DC |
| Operating pressure | -0.09 MPa … 1 MPa |
| Operating pressure | -0.9 bar … 10 bar |
| Design | Piston gate valve |
| Degree of protection | IP65 To IEC 60529 |
| Sealing principle | Soft |
| Mounting position | Any |
| Manual override | Detenting Non-detenting |
| Type of piloting | Piloted |
| Flow direction | Reversible |
| lap | Overlap |
| Signal status display | Yes |
| Pilot pressure | 0.3 MPa … 0.8 MPa |
| Pilot pressure | 3 bar … 8 bar |
| Suitability for vacuum | Yes |
| Standard nominal flow rate with QS-8 | 670 l/min |
| Standard nominal flow rate with QS-10 | 860 l/min |
| Switching time on | 9 ms |
| Switching time reversal | 22 ms |
| Max. positive test pulse with 0 signal | 400 µs |
| Max. negative test pulse with 1 signal | 900 µs |
| Permissible voltage fluctuations | +/-25% |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 1 – Low corrosion stress |
| Storage temperature | -20 °C … 40 °C |
| Media temperature | -5 °C … 50 °C |
| Relative air humidity | Max. 90% at 40 °C |
| Ambient temperature | -5 °C … 50 °C |
| Max. tightening torque for valve mounting | 0.65 Nm |
| Product weight | 100 g |
| Type of mounting | With through-hole |
| Material seals | NBR |
| Material housing | Die-cast aluminium |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model VMPA2-M1H-J-PI, part number 537953, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies VMPA2-M1H-J-PI as a solenoid valve under part number 537953. It lists valve function as 5/2-way, double solenoid. Confirm the full variant before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
Order Detail Confirmation
To help prepare an accurate spare-parts order, please include the full model code, required quantity, and delivery destination in your enquiry. Photos or existing purchase records may be useful when a suffix or replacement choice is uncertain. Product details, payment method, and shipping arrangement can then be reviewed together before order processing.
Additional information
| Brand | FESTO |
|---|---|
| Model | VMPA2-M1H-J-PI |
| Part number | 537953 |
| Product type | Solenoid Valve |
| Valve function | 5/2-way, double solenoid |
| Type of actuation | Electrical |
| Valve size | 20 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 670 l/min |
| Operating voltage | 24 V DC |
| Operating pressure | -0.9 bar … 10 bar |
| Design | Piston gate valve |






