FESTO VUVG-B18-B52-ZT-F-1P3 574451 Solenoid Valve

The FESTO VUVG-B18-B52-ZT-F-1P3, part number 574451, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: VUVG-B18-B52-ZT-F-1P3 Category: Tags: , , Brand:

Description

FESTO VUVG-B18-B52-ZT-F-1P3 574451 Solenoid Valve

The FESTO VUVG-B18-B52-ZT-F-1P3, part number 574451, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Valve function: 5/2-way, double solenoid.
  • Type of actuation: Electrical.
  • Valve size: 18 mm.

Technical Data

Brand FESTO
Model VUVG-B18-B52-ZT-F-1P3
Part number 574451
Product type Solenoid Valve
Valve function 5/2-way, double solenoid
Type of actuation Electrical
Valve size 18 mm
Standard nominal flow rate (standardised to DIN 1343) 1000 l/min
pneumatic working port Flange
Operating voltage 24 V DC
Operating pressure -0.09 MPa … 1 MPa
Operating pressure -0.9 bar … 10 bar
Design Piston gate valve
Degree of protection IP40 IP65 With plug socket
Nominal size 7.3 mm
Exhaust-air function Can be throttled
Sealing principle Soft
Mounting position Any
Manual override Detenting Non-detenting Concealed
Type of piloting Piloted
Pilot air supply External
lap Overlap
Pilot pressure 0.15 MPa … 0.8 MPa
Pilot pressure 1.5 bar … 8 bar
Switching time reversal 11 ms
Duty cycle 100%
Max. positive test pulse with 0 signal 700 µs
Max. negative test pulse with 1 signal 900 µs
Characteristic coil data 24 V DC: 1.0 W 24 V DC: low-current phase 0.3 W, high-current phase 1.0 W
Permissible voltage fluctuations +/-10%
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Vibration resistance Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Restrictions for environmental and media temperature -5 – 50 °C Without holding current reduction
Shock resistance Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC 2 – Moderate corrosion stress
Media temperature -5 °C … 60 °C
Pilot medium Compressed air to ISO 8573-1:2010 [7:4:4]
Ambient temperature -5 °C … 60 °C
Product weight 160 g
Electrical connection Via electrical sub-base
Type of mounting On manifold rail
Material seals HNBR NBR
Material housing Wrought aluminium alloy

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model VUVG-B18-B52-ZT-F-1P3, part number 574451, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies VUVG-B18-B52-ZT-F-1P3 as a solenoid valve under part number 574451. It lists valve function as 5/2-way, double solenoid. Confirm the full variant before ordering.

Installation Preparation

Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.

Payment Arrangements

The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.

Additional information

Brand

FESTO

Model

VUVG-B18-B52-ZT-F-1P3

Part number

574451

Product type

Solenoid Valve

Valve function

5/2-way, double solenoid

Type of actuation

Electrical

Valve size

18 mm

Standard nominal flow rate (standardised to DIN 1343)

1000 l/min

pneumatic working port

Flange

Operating voltage

24 V DC

Operating pressure

-0.9 bar … 10 bar