ASCO E290A083 G1-1/2 DN40 Pneumatic Angle Seat Valve

The ASCO E290A083 is an E290 series, normally closed pneumatic angle seat valve with a G1-1/2 threaded process connection and DN40 nominal size. The supplied product photos identify the full model and inlet arrangement. This version uses fluid entry above the disc and a piston-operated actuator.

Request a Quote

SKU: E290A083 Category: Tags: , , , Brand:

Description

Product Overview

The ASCO E290A083 is an E290 series, normally closed pneumatic angle seat valve with a G1-1/2 threaded process connection and DN40 nominal size. The supplied product photos identify the full model and inlet arrangement. This version uses fluid entry above the disc and a piston-operated actuator.

Key Features

  • Normally closed 2/2-way process valve operated through a pneumatic piston actuator.
  • G1-1/2 threaded connection and DN40 nominal size for matching the existing pipework.
  • Angled-seat construction with fluid entry above the disc.
  • Full model identification and multiple actual-product views support selection checks.

Technical Data

Brand ASCO
Model E290A083
Series E290
Product Type Pneumatic angle seat valve
Valve Function 2/2-way, normally closed
Process Connection G1-1/2
Nominal Diameter DN40
Body Material Stainless steel
Flow Entry Above the disc
Operator Diameter 63 mm

Application Notes

The catalogue groups this above-disc-entry construction with versions recommended for rapid-cycling steam applications. Suitability depends on the actual medium, pressure differential and temperature; do not assume that the same service limits apply to every fluid.

Model and Configuration Check

The E290A083 catalogue entry is listed under normally closed construction with fluid entry above the disc. Use the actual nameplate and the appropriate model row when checking pressure, temperature and pilot requirements.

Process operating pressure must be checked for the specific model and medium. A body pressure marking is not a substitute for the permitted operating differential. Pilot-fluid conditions must also be assessed separately from the service-fluid conditions.

Inquiry

For a quotation or model confirmation, provide the full model, quantity, destination, process medium, pressure, temperature and pilot-supply conditions. Nameplate photos can help compare the requested configuration with the existing installation.

Request a Quote

Thread Connection Reference

For the G-thread connection shown in this product designation, the E290 installation section references the combination thread arrangement according to ISO 228/1 and ISO 7/1. Check the mating pipe connection and sealing method against the installation instructions before fitting the valve.

Installation Reminder

Before fitting the product, place the machine in a safe condition according to site procedure and the manufacturer instructions. Where applicable, isolate electrical power, compressed air, fluid, or other pressure sources. Check orientation, mounting position, seal placement, and connection tightness before controlled testing.

Payment Options

We can arrange several commonly used payment options according to the order value and shipping arrangement. International orders may be settled in USD by T/T, PayPal, or another agreed method. For mainland China payments in RMB, Alipay QR code and WeChat Pay QR code arrangements are also available. The payment method is confirmed before order processing so that the purchase and delivery arrangements remain clear.

Additional information

Brand

ASCO

Model

E290A083

Series

E290

Product Type

Pneumatic angle seat valve

Valve Function

2/2-way, normally closed

Process Connection

G1-1/2

Nominal Diameter

DN40

Body Material

Stainless steel

Flow Entry

Above the disc

Operator Diameter

63 mm