ASCO E290A086 G2 DN50 Pneumatic Angle Seat Valve

The ASCO E290A086 is an E290 series, normally closed pneumatic angle seat valve with a G2 threaded process connection and DN50 nominal size. The supplied product photos identify the full model and inlet arrangement. This version uses fluid entry above the disc and a piston-operated actuator.

Request a Quote

SKU: E290A086 Category: Tags: , , , Brand:

Description

Product Overview

The ASCO E290A086 is an E290 series, normally closed pneumatic angle seat valve with a G2 threaded process connection and DN50 nominal size. The supplied product photos identify the full model and inlet arrangement. This version uses fluid entry above the disc and a piston-operated actuator.

Key Features

  • Normally closed 2/2-way process valve operated through a pneumatic piston actuator.
  • G2 threaded connection and DN50 nominal size for matching the existing pipework.
  • Angled-seat construction with fluid entry above the disc.
  • Full model identification and multiple actual-product views support selection checks.

Technical Data

Brand ASCO
Model E290A086
Series E290
Product Type Pneumatic angle seat valve
Valve Function 2/2-way, normally closed
Process Connection G2
Nominal Diameter DN50
Body Material Stainless steel
Flow Entry Above the disc
Operator Diameter 90 mm

Application Notes

The catalogue groups this above-disc-entry construction with versions recommended for rapid-cycling steam applications. Suitability depends on the actual medium, pressure differential and temperature; do not assume that the same service limits apply to every fluid.

Model and Configuration Check

The E290A086 catalogue entry is listed under normally closed construction with fluid entry above the disc. Use the actual nameplate and the appropriate model row when checking pressure, temperature and pilot requirements.

Process operating pressure must be checked for the specific model and medium. A body pressure marking is not a substitute for the permitted operating differential. Pilot-fluid conditions must also be assessed separately from the service-fluid conditions.

Inquiry

For a quotation or model confirmation, provide the full model, quantity, destination, process medium, pressure, temperature and pilot-supply conditions. Nameplate photos can help compare the requested configuration with the existing installation.

Request a Quote

Thread Connection Reference

For the G-thread connection shown in this product designation, the E290 installation section references the combination thread arrangement according to ISO 228/1 and ISO 7/1. Check the mating pipe connection and sealing method against the installation instructions before fitting the valve.

Model Matching

Correct matching should rely on the complete model code rather than a few visible characters. Products in the same series can differ in suffix, thread size, voltage, material, or mounting configuration. Comparing the original label, manual, purchase record, and installation position improves selection accuracy.

Our Service Advantages

We supply industrial automation spare parts for customers in different markets and can arrange international delivery through FedEx, UPS, DHL, or another suitable express service according to order requirements. We aim to respond to model confirmation requests, replacement questions, photo comparisons, and basic technical enquiries within 24 hours. Where compatibility is uncertain, customers may provide photos of the original nameplate or equipment for an initial review.

Additional information

Brand

ASCO

Model

E290A086

Series

E290

Product Type

Pneumatic angle seat valve

Valve Function

2/2-way, normally closed

Process Connection

G2

Nominal Diameter

DN50

Body Material

Stainless steel

Flow Entry

Above the disc

Operator Diameter

90 mm