ASCO E290A401VI G1 DN25 Pneumatic Angle Seat Valve

The ASCO E290A401VI is an E290 series, normally closed pneumatic angle seat valve with a G1 threaded process connection and DN25 nominal size. The supplied product photos identify the full model and inlet arrangement. This version uses fluid entry above the disc and a piston-operated actuator.

Request a Quote

SKU: E290A401VI Category: Tags: , , , Brand:

Description

Product Overview

The ASCO E290A401VI is an E290 series, normally closed pneumatic angle seat valve with a G1 threaded process connection and DN25 nominal size. The supplied product photos identify the full model and inlet arrangement. This version uses fluid entry above the disc and a piston-operated actuator.

Key Features

  • Normally closed 2/2-way process valve operated through a pneumatic piston actuator.
  • G1 threaded connection and DN25 nominal size for matching the existing pipework.
  • Angled-seat construction with fluid entry above the disc.
  • Full model identification and multiple actual-product views support selection checks.

Technical Data

Brand ASCO
Model E290A401VI
Series E290
Product Type Pneumatic angle seat valve
Valve Function 2/2-way, normally closed
Process Connection G1
Nominal Diameter DN25
Body Material Stainless steel
Flow Entry Above the disc
Operator Diameter 50 mm

Application Notes

The catalogue groups this above-disc-entry construction with versions recommended for rapid-cycling steam applications. Suitability depends on the actual medium, pressure differential and temperature; do not assume that the same service limits apply to every fluid.

Model and Configuration Check

The full E290A401VI designation, including the VI suffix, is retained from the product and packaging labels. The supplied E290 catalogue lists the E290A401 base model. Confirm suffix-specific options against the actual nameplate and order documentation; no additional suffix meaning or certification is assumed here.

Process operating pressure must be checked for the specific model and medium. A body pressure marking is not a substitute for the permitted operating differential. Pilot-fluid conditions must also be assessed separately from the service-fluid conditions.

Inquiry

For a quotation or model confirmation, provide the full model, quantity, destination, process medium, pressure, temperature and pilot-supply conditions. Nameplate photos can help compare the requested configuration with the existing installation.

Request a Quote

Pilot Circuit Considerations

The E290 datasheet specifies filtered air or water as the pilot medium. It restricts water piloting when the service-fluid temperature inside the valve body exceeds 100 degrees C. Review the pilot supply and the service temperature together when selecting the operating arrangement.

Installation Reminder

Before fitting the product, place the machine in a safe condition according to site procedure and the manufacturer instructions. Where applicable, isolate electrical power, compressed air, fluid, or other pressure sources. Check orientation, mounting position, seal placement, and connection tightness before controlled testing.

Our Service Advantages

We supply industrial automation spare parts for customers in different markets and can arrange international delivery through FedEx, UPS, DHL, or another suitable express service according to order requirements. We aim to respond to model confirmation requests, replacement questions, photo comparisons, and basic technical enquiries within 24 hours. Where compatibility is uncertain, customers may provide photos of the original nameplate or equipment for an initial review.

Additional information

Brand

ASCO

Model

E290A401VI

Series

E290

Product Type

Pneumatic angle seat valve

Valve Function

2/2-way, normally closed

Process Connection

G1

Nominal Diameter

DN25

Body Material

Stainless steel

Flow Entry

Above the disc

Operator Diameter

50 mm