FESTO CLR-25-20-L-P-A 535446 Linear/Swivel Clamp
The FESTO CLR-25-20-L-P-A, part number 535446, is a linear/swivel clamp. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO CLR-25-20-L-P-A 535446 Linear/Swivel Clamp
The FESTO CLR-25-20-L-P-A, part number 535446, is a linear/swivel clamp. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Total stroke: 33 mm.
- Piston diameter: 25 mm.
- Piston rod thread: M6.
Technical Data
| Brand | FESTO |
|---|---|
| Model | CLR-25-20-L-P-A |
| Part number | 535446 |
| Product type | Linear/Swivel Clamp |
| Total stroke | 33 mm |
| Piston diameter | 25 mm |
| Piston rod thread | M6 |
| Swivel angle | 90 deg +/-3 deg |
| Clamping stroke | 20 mm |
| Cushioning | Elastic cushioning rings/plates at both ends |
| Mounting position | Any |
| Design | Piston Piston rod Cylinder barrel |
| Position detection | Via proximity switch |
| Swivel direction | left |
| Operating pressure | 2 bar … 10 bar |
| Mode of operation | Double-acting |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 2 – Moderate corrosion stress |
| Ambient temperature | -10 °C … 80 °C |
| Effective clamping force at 0.2 MPa (2 bar, 29 psi) | 63 N |
| Effective clamping force at 0.4 MPa (4 bar, 58 psi) | 127 N |
| Effective clamping force at 0.6 MPa (6 bar, 87 psi) | 188 N |
| Max. tightening torque Clamping finger screw | 12 Nm |
| Theoretical clamping force at 0.6 MPa (6 bar, 87 psi) | 227 N |
| Product weight | 455 g |
| Type of mounting | With through-hole With female thread With accessories |
| Pneumatic connection | M5 |
| Material collar screws | Steel Galvanised |
| Material cover | Wrought aluminium alloy coated |
| Material seals | NBR TPE-U(PU) |
| Material housing | Smooth-anodised |
| Material piston rod | High-alloy stainless steel |
| Material cylinder barrel | Wrought aluminium alloy Smooth-anodised |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model CLR-25-20-L-P-A, part number 535446, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies CLR-25-20-L-P-A as a linear/swivel clamp under part number 535446. It lists total stroke as 33 mm. Confirm the full variant before ordering.
Operating Conditions Check
Before selecting CLR-25-20-L-P-A, confirm that the actual operating conditions fall within the specifications for the exact version being ordered. Relevant factors may include supply voltage, pressure, temperature, medium, and operating frequency, depending on the product type. Do not apply a series-wide maximum rating to an individual variant without checking its documentation.
Order Detail Confirmation
To help prepare an accurate spare-parts order, please include the full model code, required quantity, and delivery destination in your enquiry. Photos or existing purchase records may be useful when a suffix or replacement choice is uncertain. Product details, payment method, and shipping arrangement can then be reviewed together before order processing.
Additional information
| Brand | FESTO |
|---|---|
| Model | CLR-25-20-L-P-A |
| Part number | 535446 |
| Product type | Linear/Swivel Clamp |
| Total stroke | 33 mm |
| Piston diameter | 25 mm |
| Piston rod thread | M6 |
| Swivel angle | 90 deg +/-3 deg |
| Clamping stroke | 20 mm |
| Cushioning | Elastic cushioning rings/plates at both ends |
| Mounting position | Any |
| Design | Piston Piston rod Cylinder barrel |






