FESTO CMMO-ST-C5-1-DIOP 1512316 Motor Controller

The Festo CMMO-ST-C5-1-DIOP is a motor controller for use as a position controller. Its datasheet specifies 24 V DC load and logic supplies, a 5.7 A nominal output current, and an I/O process interface.

SKU: 1512316 Category: Tags: , , Brand:

Description

FESTO CMMO-ST-C5-1-DIOP 1512316 Motor Controller

The Festo CMMO-ST-C5-1-DIOP is a motor controller for use as a position controller. Its datasheet specifies 24 V DC load and logic supplies, a 5.7 A nominal output current, and an I/O process interface.

Key Features

  • 24 V DC nominal load and logic supply
  • 5.7 A nominal output current
  • I/O process interface for 32 traversing records
  • 11 digital logic inputs and 11 digital logic outputs

Technical Data

Brand FESTO
Model CMMO-ST-C5-1-DIOP
Part number 1512316
Mounting type On sub-base
Tightened
with top-hat rail
Product weight 290 g
Display Seven-segment display
Storage temperature -25 … 75 °C
Ambient temperature 0 … 50 °C
UL ambient temperature 0 … 40 °C
Relative air humidity 0 – 90 %
non-condensing
Protection class IP40
Nominal current, load supply 6 A
Peak current, load supply 8 A
Mains filter Integrated
Nominal voltage, load supply DC 24 V
Max. intermediate circuit voltage, DC 28 V
Braking resistance 15 Ohm
Braking resistance pulse power 0.1 kVA
Nominal DC voltage, logic power supply 24 V
Permissible range, logic voltage ± 15 %
Nominal current, logic supply 0.3 A
Nominal output current 5.7 A
Controller operating mode PWM-MOSFET power output stage
Cascade controller with
P position controller
PI speed controller
Proportional and integral controller for electricity
Adjustable current reduction Using software
Step adjustment Using software
Protective function I²t monitoring
Temperature monitoring
Current monitoring
Voltage failure detection
Drag error monitoring
Software end-position detection
Nominal current adjustment Using software
Parameters configuring interface Ethernet
Ethernet, supported protocols TCP/IP
Process interface I/O coupling
For 32 traversing records
Rotor position sensor Encoder
Position sensor Encoder
Encoder interface input, characteristics RS422
Number of digital logic inputs 11
Input circuit logic PNP (positive-switching)
Logic input characteristics galvanically connected to logic potential
Specification, logic input Based on IEC 61131-2
Logic input working range 24 V
Number of 24 V DC digital logic outputs 11
Switching logic, outputs PNP (positive-switching)
Digital logic output characteristics Freely configurable to a given extent
Not electrically isolated
Max. current, digital logic outputs 100 mA
Safety function Safe torque off (STO)
Safety Integrity Level (SIL) Safe torque off (STO)/SIL 3
Performance level (PL) Safe torque off (STO)/category 3, Performance Level e

Application Notes

Use this exact model only after confirming the complete part number, electrical supply, installed interfaces and environmental limits against the equipment documentation. Similar series members may have different ratings or communication options.

Selection and Installation

Compare the original nameplate and connection layout with the datasheet for this part number. Follow Festo and machine manufacturer instructions for wiring, mounting and commissioning. Confirm any uncertain option or suffix before energising the equipment.

Inquiry

For a quotation or replacement enquiry, provide model CMMO-ST-C5-1-DIOP, part number 1512316, quantity, destination and clear photos of the installed unit where available.

I/O Positioning Interface

The CMMO-ST-C5-1-DIOP datasheet lists an I/O process interface for 32 traversing records, with 11 digital logic inputs and 11 24 V DC digital logic outputs. Confirm the installed wiring and control method before replacement.

Installation Preparation

Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.

Payment Arrangements

The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.

Additional information

Brand

FESTO

Model

CMMO-ST-C5-1-DIOP

Part Number

1512316

Mounting type

On sub-base Tightened with top-hat rail

Product weight

290 g

Display

Seven-segment display

Storage temperature

-25 … 75 °C

Ambient temperature

0 … 50 °C

UL ambient temperature

0 … 40 °C

Relative air humidity

0 – 90 % non-condensing

Protection class

IP40