FESTO CMMP-AS-C10-11A-P3 551024 Motor Controller
The Festo CMMP-AS-C10-11A-P3 is a motor controller for servo motors. The datasheet identifies a three-phase 400 V AC nominal operating supply, 10 A nominal output current, and a 6,000 VA nominal controller power.
Description
FESTO CMMP-AS-C10-11A-P3 551024 Motor Controller
The Festo CMMP-AS-C10-11A-P3 is a motor controller for servo motors. The datasheet identifies a three-phase 400 V AC nominal operating supply, 10 A nominal output current, and a 6,000 VA nominal controller power.
Key Features
- Three-phase 400 V AC nominal operating voltage
- 10 A nominal output current
- 6,000 VA nominal controller power
- 24 V DC nominal logic power supply
Technical Data
| Brand | FESTO |
|---|---|
| Model | CMMP-AS-C10-11A-P3 |
| Part number | 551024 |
| Mains filter | Integrated |
| Safety function | Safe Torque off (STO) |
| Safety Integrity Level (SIL) | Safe torque off (STO)/SIL 2 |
| Performance level (PL) | Safe torque off (STO)/category 3, performance level d |
| Display | Seven-segment display |
| Output frequency | 0 … 1,000 Hz |
| Output voltage range AC | 0 – 360 V |
| Braking resistance | 68 Ohm |
| Braking resistance pulse power | 8.5 kVA |
| Max. current, digital logic outputs | 100 mA |
| Max. peak current duration | 3 s |
| Max. intermediate circuit voltage, DC | 560 V |
| Nominal output current | 10 A |
| Nominal operating voltage, AC | 400 V |
| Nominal controller power | 6,000 VA |
| Nominal DC voltage, logic power supply | 24 V |
| Nominal current | 11 A |
| Line frequency | 50 … 60 Hz |
| Parameters configuring interface | Parameters configuration and commissioning Control interface (PtP) RS232 (9600…115000 Bits/s) |
| Nominal operating voltage, phases | Three-phase |
| Peak power | 12,000 VA |
| Effective peak current per phase | 20 A |
| Current consumption, logic power supply without clamping brake | 1 A |
| Max. current consumption for logic supply, holding brake and I/O | 3.5 A |
| Storage temperature | -25 … 70 °C |
| Relative air humidity | 0 – 90 % |
| Protection class | IP20 |
| Ambient temperature | 0 … 50 °C |
| Product weight | 3,700 g |
| Number of analogue monitor outputs | 2 |
| Number of analogue setpoint inputs | 3 |
| Number of 24 V DC digital logic outputs | 5 |
| Number of digital logic inputs | 10 |
| Communications profile | DS301/DSP402 FHPP |
| Process interface | I/O coupling For 255 positioning records |
| Encoder interface output, characteristics | Resolution 16384 ppr |
| Encoder interface input, characteristics | RS422 EnDat 2.2 |
| Encoder interface output, function | Actual value feedback via encoder signals in speed control mode Setpoint specification for downstream slave drive unit |
| Encoder interface input, function | Encoder signal, speed setpoint in RPM In synchronous operation as specified speed in RPM for the slave drive unit Setpoint position value as encoder signal |
| Fieldbus coupling | CANopen DeviceNet Ethernet Profibus DP Sercos |
| Max. fieldbus transmission speed | 1 Mbit/s |
| Mounting type | on mounting plate Tightened |
Application Notes
Use this exact model only after confirming the complete part number, electrical supply, installed interfaces and environmental limits against the equipment documentation. Similar series members may have different ratings or communication options.
Selection and Installation
Compare the original nameplate and connection layout with the datasheet for this part number. Follow Festo and machine manufacturer instructions for wiring, mounting and commissioning. Confirm any uncertain option or suffix before energising the equipment.
Inquiry
For a quotation or replacement enquiry, provide model CMMP-AS-C10-11A-P3, part number 551024, quantity, destination and clear photos of the installed unit where available.
Electrical Supply Matching
The datasheet specifies a three-phase 400 V AC nominal operating voltage and a separate 24 V DC nominal logic supply. Confirm both supplies and the motor connection when assessing this controller for replacement.
Maintenance Inspection
Before replacing CMMP-AS-C10-11A-P3, examine the existing installation for issues that may affect the new part. Check the original label, ports, seals, fittings, cables, and mounting points as applicable. Finding a leak, worn connection, or loose contact before installation can help avoid repeating the same problem after replacement.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | CMMP-AS-C10-11A-P3 |
| Part Number | 551024 |
| Mains filter | Integrated |
| Safety function | Safe Torque off (STO) |
| Safety Integrity Level (SIL) | Safe torque off (STO)/SIL 2 |
| Performance level (PL) | Safe torque off (STO)/category 3, performance level d |
| Display | Seven-segment display |
| Output frequency | 0 … 1,000 Hz |
| Output voltage range AC | 0 – 360 V |
| Braking resistance | 68 Ohm |





