FESTO CMMP-AS-C5-3A-M0 1622902 Motor Controller
The Festo CMMP-AS-C5-3A-M0 is a single-phase motor controller with a 230 V AC nominal operating voltage and 5 A nominal output current. Its datasheet lists USB and Ethernet parameterisation interfaces.
Description
FESTO CMMP-AS-C5-3A-M0 1622902 Motor Controller
The Festo CMMP-AS-C5-3A-M0 is a single-phase motor controller with a 230 V AC nominal operating voltage and 5 A nominal output current. Its datasheet lists USB and Ethernet parameterisation interfaces.
Key Features
- Single-phase 230 V AC nominal operating voltage
- 5 A nominal output current
- USB and Ethernet parameterisation
- CANopen and Modbus/TCP fieldbus links listed
Technical Data
| Brand | FESTO |
|---|---|
| Model | CMMP-AS-C5-3A-M0 |
| Part number | 1622902 |
| Type of mounting | On sub-base Screw-clamped |
| Product weight | 2200 g |
| Display | 7-segment display |
| Storage temperature | -25 °C … 70 °C |
| Ambient temperature | 0 °C … 40 °C |
| Relative air humidity | 0 – 90% |
| Degree of protection | IP10 IP20 |
| Phases of nominal operating voltage | Single phase |
| Nominal operating voltage AC | 230 V |
| Permissible voltage fluctuations | +/-10% |
| Input voltage range AC | 100 V … 230 V |
| Mains frequency | 50 Hz … 60 Hz |
| Nominal current | 4 A … 6 A |
| Active PFC | Yes |
| Mains filter | Built in |
| Max. intermediate circuit voltage DC | 320 V |
| Brake resistance | 60 Ohm |
| Pulse power, brake resistance | 2.8 kVA |
| Nominal voltage for logic power supply DC | 24 V |
| Current consumption of logic power supply without clamping brake | 0.65 A |
| Output voltage class AC | 3x 0 – 270 V |
| Nominal output current | 5 A |
| Peak current per phase, effective | 10 A |
| Max. peak current duration | 5 s |
| Controller nominal output | 1000 VA |
| Maximum output | 2000 VA |
| Parameterisation interface | Parameterisation and commissioning USB Ethernet |
| Fieldbus link | CANopen Modbus/TCP |
| Communication profile | DS301/DSP402 |
| Process interfacing | I/O coupling For 256 positioning records |
| Max. fieldbus transmission rate | 1 Mbit/s |
| Encoder interface output, features | Resolution 16384 ppr |
| Encoder interface output, function | Actual value feedback via encoder signals in speed control mode. Setpoint specification for downstream slave drive. |
| Encoder interface input, features | RS422 SINCOS |
| Encoder interface input, function | Setpoint speed value as encoder signal Specifies the speed of the slave drive in synchronous mode. |
| Number of digital logic inputs | 10 |
| Number of digital logic outputs 24 V DC | 5 |
| Number of analogue setpoint inputs | 2 |
| Number of analogue monitor outputs | 2 |
| Safety function | Safe torque off (STO) Safe Stop 1 (SS1) |
| Safety Integrity Level (SIL) | Safe torque off (STO)/SIL 3/SILCL 3 |
| Performance Level (PL) | Safe Torque Off (STO)/category 4, performance level e |
Application Notes
Use this exact model only after confirming the complete part number, electrical supply, installed interfaces and environmental limits against the equipment documentation. Similar series members may have different ratings or communication options.
Selection and Installation
Compare the original nameplate and connection layout with the datasheet for this part number. Follow Festo and machine manufacturer instructions for wiring, mounting and commissioning. Confirm any uncertain option or suffix before energising the equipment.
Inquiry
For a quotation or replacement enquiry, provide model CMMP-AS-C5-3A-M0, part number 1622902, quantity, destination and clear photos of the installed unit where available.
M0 Interface Selection
Festo lists USB and Ethernet parameterisation interfaces and CANopen and Modbus/TCP fieldbus links for the CMMP-AS-C5-3A-M0. Verify the controller suffix and communication connection against the installed unit.
Delivery Inspection
Check the product when it arrives and before it is fitted to the machine. Verify the marking against the order, and inspect the visible condition, interfaces, mounting features, and supplied accessories. If the model or physical condition does not match expectations, clarify the discrepancy before installation.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | CMMP-AS-C5-3A-M0 |
| Part Number | 1622902 |
| Type of mounting | On sub-base Screw-clamped |
| Product weight | 2200 g |
| Display | 7-segment display |
| Storage temperature | -25 °C … 70 °C |
| Ambient temperature | 0 °C … 40 °C |
| Relative air humidity | 0 – 90% |
| Degree of protection | IP10 IP20 |
| Phases of nominal operating voltage | Single phase |









