FESTO CMMS-AS-C4-3A-G2 572986 Motor Controller

The Festo CMMS-AS-C4-3A-G2 is a motor controller for servo motors. Its datasheet specifies a single-phase 230 V AC nominal supply, 4 A nominal output current, 600 VA nominal controller power and safe torque off (STO).

SKU: 572986 Category: Tags: , , Brand:

Description

FESTO CMMS-AS-C4-3A-G2 572986 Motor Controller

The Festo CMMS-AS-C4-3A-G2 is a motor controller for servo motors. Its datasheet specifies a single-phase 230 V AC nominal supply, 4 A nominal output current, 600 VA nominal controller power and safe torque off (STO).

Key Features

  • Single-phase 230 V AC nominal operating voltage
  • 4 A nominal output current
  • 600 VA nominal controller power
  • Safe torque off (STO) listed for this model

Technical Data

Brand FESTO
Model CMMS-AS-C4-3A-G2
Part number 572986
Active PFC No
Mains filter Integrated
Safety function Safe torque off (STO)
Performance level (PL) Safe torque off (STO)/category 3, performance level d
Display Seven-segment display
Output frequency 0 … 1,000 Hz
Output voltage range AC 0 V up to input voltage
Braking resistor, external 100 Ohm
Braking resistor, integrated 230 Ohm
Setpoint input impedance 20 kOhm
Braking resistance pulse power 0.7 kVA
Max. current, digital logic outputs 100 mA
Max. nominal input current 5 A
Max. length of motor cable without external mains filter 15 m
Max. peak current duration 2 s
Max. intermediate circuit voltage, DC 320 V
Nominal output current 4 A
Nominal operating voltage, AC 230 V
Input voltage range AC 95 … 250 V
Nominal controller power 600 VA
Nominal DC voltage, logic power supply 24 V
Parameters configuring interface Parameters configuration and commissioning
Control interface (PtP)
RS232 (9600…115000 Bits/s)
Nominal operating voltage, phases Single-phase
Peak current 10 A
Current consumption, logic power supply without clamping brake 0.35 A
Storage temperature -25 … 70 °C
Protection class IP10
IP20
Ambient temperature 0 … 50 °C
Note on ambient temperature Power must be reduced by 4% per °C at ambient temperatures above
40° C.
Product weight 1,500 g
Number of analogue outputs 1
Number of analogue inputs 1
Number of 24 V DC digital logic outputs 5
Number of digital logic inputs 14
Communications profile DS301/DSP402
FHPP
Process interface I/O coupling
for 64 position sets
Encoder interface output, characteristics Resolution 4096 ppr
Encoder interface input, characteristics EnDat 2.2
Encoder interface output, function Actual value feedback via encoder signals in speed control mode
Setpoint specification for downstream slave drive unit
Encoder interface input, function Setpoint position value as encoder signal
Fieldbus coupling CANopen
DeviceNet
Profibus DP
Max. fieldbus transmission speed 1 Mbit/s
Mounting type Mounting plate, bolted

Application Notes

Confirm the complete model code, the installed mechanical or electrical interface and the operating limits against the original equipment. Similar products within a series can differ in pressure, supply, output, mounting or communication.

Selection and Installation

Compare the original nameplate, the part number and the product-specific datasheet. Follow Festo and machine manufacturer instructions for mounting, connections and controlled commissioning. Clarify any uncertain option or suffix before ordering.

Inquiry

For a quotation or replacement enquiry, provide model CMMS-AS-C4-3A-G2, part number 572986, quantity, destination and clear photos of the original unit when available.

Ambient Temperature Derating

Festo states that power must be reduced by 4% per °C when the ambient temperature exceeds 40 °C. Review the installation temperature and load before replacing or commissioning this controller.

Operating Conditions Check

Before selecting CMMS-AS-C4-3A-G2, confirm that the actual operating conditions fall within the specifications for the exact version being ordered. Relevant factors may include supply voltage, pressure, temperature, medium, and operating frequency, depending on the product type. Do not apply a series-wide maximum rating to an individual variant without checking its documentation.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

CMMS-AS-C4-3A-G2

Part Number

572986

Active PFC

No

Mains filter

Integrated

Safety function

Safe torque off (STO)

Performance level (PL)

Safe torque off (STO)/category 3, performance level d

Display

Seven-segment display

Output frequency

0 … 1,000 Hz

Output voltage range AC

0 V up to input voltage

Braking resistor, external

100 Ohm