FESTO CMMT-AS-C2-3A-EC-S1 5340819 Servo Drive

The Festo CMMT-AS-C2-3A-EC-S1 is a servo drive with a single-phase 230 V AC nominal operating supply. The datasheet lists 2 A effective nominal current per phase and an EtherCAT fieldbus interface.

SKU: 5340819 Category: Tags: , , Brand:

Description

FESTO CMMT-AS-C2-3A-EC-S1 5340819 Servo Drive

The Festo CMMT-AS-C2-3A-EC-S1 is a servo drive with a single-phase 230 V AC nominal operating supply. The datasheet lists 2 A effective nominal current per phase and an EtherCAT fieldbus interface.

Key Features

  • Single-phase 230 V AC nominal supply
  • 2 A effective nominal current per phase
  • EtherCAT fieldbus interface
  • 24 V DC nominal logic supply

Technical Data

Brand FESTO
Model CMMT-AS-C2-3A-EC-S1
Part number 5340819
Mounting type Mounting plate, bolted
Product weight 1,300 g
Display LED green/yellow/red
Storage temperature -25 … 55 °C
Ambient temperature 0 … 50 °C
Note on ambient temperature Power must be reduced by 3%/°C at ambient temperatures above 40°C.
UL ambient temperature 0 … 40 °C
Relative air humidity 5 – 90 %
non-condensing
Protection class IP20
Overvoltage category III
Nominal operating voltage, phases Single-phase
Nominal operating voltage, AC 230 V
Permissible voltage fluctuation -20 % / +15 %
Input voltage range AC 100 … 230 V
Line frequency 48 … 62 Hz
Nominal current, load supply 2.8 A
Peak current, load supply 8.4 A
Nominal voltage, load supply DC 320 V
Permissible range, load supply -20 %/+15 %
Nominal DC voltage, logic power supply 24 V
Current consumption, logic power supply without clamping brake 0.5 A
Output voltage range AC 3x (0 – Input) V
Effective nominal current per phase 2 A
Effective peak current per phase 6 A
Max. peak current duration 2 s
Nominal controller power 350 W
Number of inputs for motor temperature sensor 1
Ethernet interface, function Parameterisation and commissioning
Ethernet interface, protocol TCP/IP
Fieldbus interface, protocol EtherCAT
Fieldbus coupling EtherCAT
Communications profile CiA402
CoE (CANopen over EtherCAT)
EoE (Ethernet over EtherCAT)
FoE (File over EtherCAT)
Process interface I/O mode for 256 position sets
Interpolated Mode CSP
Interpolated Mode CST
Interpolated Mode CSV
Fieldbus interface, transmission rate 100 Mbit/s
Fieldbus interface, type of connection 2x socket
Fieldbus interface, connection technology RJ45
Encoder interface, function ENDAT 2.1 encoder
ENDAT 2.2 encoder
Hiperface encoder
Incremental encoder
Nikon
SIN/COS encoder
Encoder interface 2, function Incremental encoder
SIN/COS encoder
Encoder interface output, characteristics 1 MHz maximum output frequency
max. 16384 ppr
Encoder interface input, characteristics 1 MHz maximum output frequency
max. 16384 ppr
Number of digital logic inputs 12
Number of high-speed logic inputs 2
Number of 24 V DC digital logic outputs 6
Number of high-speed switching outputs 2
Number of floating switching outputs 1
Number of analogue setpoint inputs 1
Safety function Safe brake control (SBC)
Safe torque off (STO)
Safe stop 1 (SS1)
Performance level (PL) Safe brake control (SBC) / category 3, Performance Level e
Safe Torque off (STO)/Category 4, Performance Level e
Number of safe 2-pin inputs 2
Number of diagnostic outputs 2

Application Notes

Confirm the complete model code, the installed mechanical or electrical interface and the operating limits against the original equipment. Similar products within a series can differ in pressure, supply, output, mounting or communication.

Selection and Installation

Compare the original nameplate, the part number and the product-specific datasheet. Follow Festo and machine manufacturer instructions for mounting, connections and controlled commissioning. Clarify any uncertain option or suffix before ordering.

Inquiry

For a quotation or replacement enquiry, provide model CMMT-AS-C2-3A-EC-S1, part number 5340819, quantity, destination and clear photos of the original unit when available.

EtherCAT Interface

The EC-S1 datasheet lists EtherCAT as the fieldbus protocol, with two RJ45 sockets and a 100 Mbit/s transmission rate. Confirm the installed bus type and connector layout before replacement.

Spare Parts Records

Keeping a clear record of installed components can make future maintenance and purchasing more efficient. For this product, record the brand, full model code, important specifications, and equipment location. Update the record whenever a component or machine configuration changes, so the next replacement decision is based on current information.

Order Detail Confirmation

To help prepare an accurate spare-parts order, please include the full model code, required quantity, and delivery destination in your enquiry. Photos or existing purchase records may be useful when a suffix or replacement choice is uncertain. Product details, payment method, and shipping arrangement can then be reviewed together before order processing.

Additional information

Brand

FESTO

Model

CMMT-AS-C2-3A-EC-S1

Part Number

5340819

Mounting type

Mounting plate, bolted

Product weight

1,300 g

Display

LED green/yellow/red

Storage temperature

-25 … 55 °C

Ambient temperature

0 … 50 °C

Note on ambient temperature

Power must be reduced by 3%/°C at ambient temperatures above 40°C.

UL ambient temperature

0 … 40 °C

Relative air humidity

5 – 90 % non-condensing