FESTO CPE14-M1BH-5/3G-1/8 196937 Solenoid Valve

The FESTO CPE14-M1BH-5/3G-1/8, part number 196937, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: CPE14-M1BH-5/3G-1/8 Category: Tags: , , Brand:

Description

FESTO CPE14-M1BH-5/3G-1/8 196937 Solenoid Valve

The FESTO CPE14-M1BH-5/3G-1/8, part number 196937, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Valve function: 5/3-way, closed.
  • Type of actuation: Electrical.
  • Construction width: 14 mm.

Technical Data

Brand FESTO
Model CPE14-M1BH-5/3G-1/8
Part number 196937
Product type Solenoid Valve
Valve function 5/3-way, closed
Type of actuation Electrical
Construction width 14 mm
Standard nominal flow rate (standardised to DIN 1343) 750 l/min
pneumatic working port G1/8
Operating voltage 24 V DC
Operating pressure 0.3 MPa … 0.8 MPa
Operating pressure 3 bar … 8 bar
Design Piston gate valve
Type of reset Mechanical spring
Degree of protection IP65 With plug socket To IEC 60529
Nominal size 6 mm
Exhaust-air function Can be throttled
Sealing principle Soft
Mounting position Any
Manual override Detenting via accessory Non-detenting
Type of piloting Piloted
Pilot air supply Internal
Flow direction Non-reversible
Valve position code Label holder
lap Overlap
Switching time off 42 ms
Switching time on 20 ms
Duty cycle 100% in conjunction with holding current reduction
Max. positive test pulse with 0 signal 1200 µs
Max. negative test pulse with 1 signal 900 µs
Characteristic coil data 24 V DC: 1.28 W
Permissible voltage fluctuations -15% / +10%
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Vibration resistance Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Shock resistance Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC 2 – Moderate corrosion stress
Media temperature -5 °C … 50 °C
Ambient temperature -5 °C … 50 °C
Product weight 120 g
Electrical connection 2-pin
Type of mounting With through-hole
Pilot exhaust port 82 M3
Pilot exhaust port 84 M3
Pilot air port 12 M3
Pilot air port 14 M3
Pneumatic connection, port 1 G1/8
Pneumatic connection, port 2 G1/8
Pneumatic connection, port 3 G1/8
Pneumatic connection, port 4 G1/8
Pneumatic connection, port 5 G1/8
Material seals NBR
Material housing Die-cast aluminium

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model CPE14-M1BH-5/3G-1/8, part number 196937, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies CPE14-M1BH-5/3G-1/8 as a solenoid valve under part number 196937. It lists valve function as 5/3-way, closed. Confirm the full variant before ordering.

Delivery Inspection

Check the product when it arrives and before it is fitted to the machine. Verify the marking against the order, and inspect the visible condition, interfaces, mounting features, and supplied accessories. If the model or physical condition does not match expectations, clarify the discrepancy before installation.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

CPE14-M1BH-5/3G-1/8

Part number

196937

Product type

Solenoid Valve

Valve function

5/3-way, closed

Type of actuation

Electrical

Construction width

14 mm

Standard nominal flow rate (standardised to DIN 1343)

750 l/min

pneumatic working port

G1/8

Operating voltage

24 V DC

Operating pressure

3 bar … 8 bar