FESTO CPE18-M1H-5J-1/4 163143 Solenoid Valve

The FESTO CPE18-M1H-5J-1/4, part number 163143, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: CPE18-M1H-5J-1/4 Category: Tags: , , Brand:

Description

FESTO CPE18-M1H-5J-1/4 163143 Solenoid Valve

The FESTO CPE18-M1H-5J-1/4, part number 163143, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Valve function: 5/2-way, double solenoid.
  • Type of actuation: Electrical.
  • Construction width: 18 mm.

Technical Data

Brand FESTO
Model CPE18-M1H-5J-1/4
Part number 163143
Product type Solenoid Valve
Valve function 5/2-way, double solenoid
Type of actuation Electrical
Construction width 18 mm
Standard nominal flow rate (standardised to DIN 1343) 1500 l/min
pneumatic working port G1/4
Operating voltage 24 V DC
Operating pressure 0.2 MPa … 1 MPa
Operating pressure 2 bar … 10 bar
Design Piston gate valve
Degree of protection IP65 With plug socket To IEC 60529
Nominal size 8 mm
Exhaust-air function Can be throttled
Sealing principle Soft
Mounting position Any
Manual override Detenting via accessory Non-detenting
Type of piloting Piloted
Pilot air supply Internal
Flow direction Non-reversible
Valve position code Label holder
lap Overlap
Switching time reversal 13 ms
Duty cycle 100%
Max. positive test pulse with 0 signal 3300 µs
Max. negative test pulse with 1 signal 3100 µs
Characteristic coil data 24 V DC: 1.5 W
Permissible voltage fluctuations -15% / +10%
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Vibration resistance Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Shock resistance Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC 2 – Moderate corrosion stress
Media temperature -5 °C … 50 °C
Ambient temperature -5 °C … 50 °C
Product weight 270 g
Electrical connection Type C
Type of mounting With through-hole
Pilot exhaust port 82 M5
Pilot exhaust port 84 M5
Pilot air port 12 M5
Pilot air port 14 M5
Pneumatic connection, port 1 G1/4
Pneumatic connection, port 2 G1/4
Pneumatic connection, port 3 G1/4
Pneumatic connection, port 4 G1/4
Pneumatic connection, port 5 G1/4
Material seals NBR
Material housing Die-cast aluminium

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model CPE18-M1H-5J-1/4, part number 163143, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies CPE18-M1H-5J-1/4 as a solenoid valve under part number 163143. It lists valve function as 5/2-way, double solenoid. Confirm the full variant before ordering.

Operating Conditions Check

Before selecting CPE18-M1H-5J-1/4, confirm that the actual operating conditions fall within the specifications for the exact version being ordered. Relevant factors may include supply voltage, pressure, temperature, medium, and operating frequency, depending on the product type. Do not apply a series-wide maximum rating to an individual variant without checking its documentation.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

CPE18-M1H-5J-1/4

Part number

163143

Product type

Solenoid Valve

Valve function

5/2-way, double solenoid

Type of actuation

Electrical

Construction width

18 mm

Standard nominal flow rate (standardised to DIN 1343)

1500 l/min

pneumatic working port

G1/4

Operating voltage

24 V DC

Operating pressure

2 bar … 10 bar