FESTO DHRS-40-A 1310166 Radial Gripper

The FESTO DHRS-40-A, part number 1310166, is a radial gripper. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: DHRS-40-A Category: Tags: , , Brand:

Description

FESTO DHRS-40-A 1310166 Radial Gripper

The FESTO DHRS-40-A, part number 1310166, is a radial gripper. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Size: 40.
  • Max. replacement accuracy: ≤0.2 mm.
  • Max. opening angle: 180 deg.

Technical Data

Brand FESTO
Model DHRS-40-A
Part number 1310166
Product type Radial Gripper
Size 40
Max. replacement accuracy ≤0.2 mm
Max. opening angle 180 deg
Rotationally symmetrical ≤0.2 mm
Repetition accuracy, gripper ≤0.1 mm
Number of gripper jaws 2
Mounting position Any
Mode of operation Double-acting
Gripper function Radial
Design Force pilot operated motion sequence
Position detection Via proximity switch
Operating pressure 2 bar … 8 bar
Max. operating frequency of gripper ≤2 Hz
Min. opening time at 0.6 MPa (6 bar, 87 psi) 113 ms
Min. closing time at 0.6 MPa (6 bar, 87 psi) 142 ms
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 1 – Low corrosion stress
Ambient temperature 5 °C … 60 °C
Total gripping torque at 0.6 MPa (6 bar, 87 psi), opening 725 Ncm
Total gripper torque, closing, 0.6 MPa (6 bar, 87 psi) 660 Ncm
Mass moment of inertia 4.18 kgcm²
Max. force on gripper jaw Fz static 200 N
Max. torque at gripper Mx static 14 Nm
Max. torque at gripper My static 14 Nm
Max. torque at gripper Mz static 14 Nm
Product weight 829 g
Type of mounting Either: Via female thread and centring sleeve Via through-hole and centring sleeve
Pneumatic connection G1/8
Material cover cap PA
Material housing Hard anodised wrought aluminium alloy
Material gripper jaws High-alloy steel

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model DHRS-40-A, part number 1310166, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies DHRS-40-A as a radial gripper under part number 1310166. It lists size as 40. Confirm the full variant before ordering.

Maintenance Inspection

Before replacing DHRS-40-A, examine the existing installation for issues that may affect the new part. Check the original label, ports, seals, fittings, cables, and mounting points as applicable. Finding a leak, worn connection, or loose contact before installation can help avoid repeating the same problem after replacement.

International Delivery Options

We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.

Additional information

Brand

FESTO

Model

DHRS-40-A

Part number

1310166

Product type

Radial Gripper

Size

40

Max. replacement accuracy

≤0.2 mm

Max. opening angle

180 deg

Rotationally symmetrical

≤0.2 mm

Repetition accuracy, gripper

≤0.1 mm

Number of gripper jaws

2

Mounting position

Any

Mode of operation

Double-acting