FESTO DHWS-40-A 1310184 Angle Gripper

The FESTO DHWS-40-A, part number 1310184, is a angle gripper. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: DHWS-40-A Category: Tags: , , Brand:

Description

FESTO DHWS-40-A 1310184 Angle Gripper

The FESTO DHWS-40-A, part number 1310184, is a angle gripper. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Size: 40.
  • Max. replacement accuracy: ≤0.2 mm.
  • Max. opening angle: 40 deg.

Technical Data

Brand FESTO
Model DHWS-40-A
Part number 1310184
Product type Angle Gripper
Size 40
Max. replacement accuracy ≤0.2 mm
Max. opening angle 40 deg
Rotationally symmetrical ≤0.2 mm
Repetition accuracy, gripper ≤0.04 mm
Number of gripper jaws 2
Mounting position Any
Mode of operation Double-acting
Gripper function Bracket
Design Lever
Position detection Via proximity switch
Operating pressure 2 bar … 8 bar
Max. operating frequency of gripper ≤3 Hz
Min. opening time at 0.6 MPa (6 bar, 87 psi) 63 ms
Min. closing time at 0.6 MPa (6 bar, 87 psi) 96 ms
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 1 – Low corrosion stress
Ambient temperature 5 °C … 60 °C
Total gripping torque at 0.6 MPa (6 bar, 87 psi), opening 1497 Ncm
Total gripper torque, closing, 0.6 MPa (6 bar, 87 psi) 1362 Ncm
Mass moment of inertia 3.81 kgcm²
Max. force on gripper jaw Fz static 200 N
Max. torque at gripper Mx static 13 Nm
Max. torque at gripper My static 13 Nm
Max. torque at gripper Mz static 13 Nm
Product weight 775 g
Type of mounting Either: Via female thread and centring sleeve Via through-hole and centring sleeve
Pneumatic connection G1/8
Material cover cap PA
Material housing Wrought aluminium alloy Hard anodised
Material gripper jaws High-alloy steel

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model DHWS-40-A, part number 1310184, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies DHWS-40-A as a angle gripper under part number 1310184. It lists size as 40. Confirm the full variant before ordering.

Functional Check After Replacement

After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.

Payment Arrangements

The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.

Additional information

Brand

FESTO

Model

DHWS-40-A

Part number

1310184

Product type

Angle Gripper

Size

40

Max. replacement accuracy

≤0.2 mm

Max. opening angle

40 deg

Rotationally symmetrical

≤0.2 mm

Repetition accuracy, gripper

≤0.04 mm

Number of gripper jaws

2

Mounting position

Any

Mode of operation

Double-acting