FESTO GRLA-3/8-QS-10-RS-D 534343 One-Way Flow Control Valve

The FESTO GRLA-3/8-QS-10-RS-D, part number 534343, is a one-way flow control valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: GRLA-3/8-QS-10-RS-D Category: Tags: , , Brand:

Description

FESTO GRLA-3/8-QS-10-RS-D 534343 One-Way Flow Control Valve

The FESTO GRLA-3/8-QS-10-RS-D, part number 534343, is a one-way flow control valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Valve function: Exhaust air one-way flow control function.
  • Pneumatic connection, port 1: QS-10.
  • Pneumatic connection, port 2: G3/8.

Technical Data

Brand FESTO
Model GRLA-3/8-QS-10-RS-D
Part number 534343
Product type One-Way Flow Control Valve
Valve function Exhaust air one-way flow control function
Pneumatic connection, port 1 QS-10
Pneumatic connection, port 2 G3/8
Adjustment component Knurled screw
Type of mounting Screw-in With male thread
Standard nominal flow rate in flow control direction 900 l/min
Standard nominal flow rate in blocked direction 540 l/min … 975 l/min
Operating pressure 0.02 MPa … 1 MPa
Operating pressure 0.2 bar … 10 bar
Operating pressure 2.9 psi … 145 psi
Ambient temperature -10 °C … 60 °C
Mounting position Any
Operating pressure complete temperature range 0.2 bar … 10 bar
Standard flow rate in flow control direction 0.6->0 MPa (6->0 bar, 87->0 psi) 1400 l/min
Standard flow rate in non-return direction 0.6->0 MPa (6->0 bar, 87->0 psi) 1160 l/min … 1620 l/min
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Storage temperature -10 °C … 40 °C
Media temperature -10 °C … 60 °C
Nominal torque 13 Nm
Tolerance for nominal tightening torque ±20%
Product weight 72 g
Material seals NBR
Material hollow bolt Wrought aluminium alloy anodised
Material release ring POM
Material knurled head Wrought aluminium alloy anodised
Material adjusting screw Brass
Material nut Wrought aluminium alloy
Material swivel fitting Die-cast zinc

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model GRLA-3/8-QS-10-RS-D, part number 534343, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies GRLA-3/8-QS-10-RS-D as a one-way flow control valve under part number 534343. It lists valve function as Exhaust air one-way flow control function. Confirm the full variant before ordering.

Installation Preparation

Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

GRLA-3/8-QS-10-RS-D

Part number

534343

Product type

One-Way Flow Control Valve

Valve function

Exhaust air one-way flow control function

Pneumatic connection, port 1

QS-10

Pneumatic connection, port 2

G3/8

Adjustment component

Knurled screw

Type of mounting

Screw-in With male thread

Standard nominal flow rate in flow control direction

900 l/min

Standard nominal flow rate in blocked direction

540 l/min … 975 l/min

Operating pressure

0.02 MPa … 1 MPa