FESTO GRLA-M5-QS-6-RS-D 197578 One-Way Flow Control Valve
The FESTO GRLA-M5-QS-6-RS-D, part number 197578, is a one-way flow control valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO GRLA-M5-QS-6-RS-D 197578 One-Way Flow Control Valve
The FESTO GRLA-M5-QS-6-RS-D, part number 197578, is a one-way flow control valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Valve function: Exhaust air one-way flow control function.
- Pneumatic connection, port 1: QS-6.
- Pneumatic connection, port 2: M5.
Technical Data
| Brand | FESTO |
|---|---|
| Model | GRLA-M5-QS-6-RS-D |
| Part number | 197578 |
| Product type | One-Way Flow Control Valve |
| Valve function | Exhaust air one-way flow control function |
| Pneumatic connection, port 1 | QS-6 |
| Pneumatic connection, port 2 | M5 |
| Adjustment component | Knurled screw |
| Type of mounting | Screw-in With male thread |
| Standard nominal flow rate in flow control direction | 115 l/min |
| Standard nominal flow rate in blocked direction | 70 l/min … 110 l/min |
| Operating pressure | 0.02 MPa … 1 MPa |
| Operating pressure | 0.2 bar … 10 bar |
| Operating pressure | 2.9 psi … 145 psi |
| Ambient temperature | -10 °C … 60 °C |
| Mounting position | Any |
| Operating pressure complete temperature range | 0.2 bar … 10 bar |
| Standard flow rate in flow control direction 0.6->0 MPa (6->0 bar, 87->0 psi) | 185 l/min |
| Standard flow rate in non-return direction 0.6->0 MPa (6->0 bar, 87->0 psi) | 145 l/min … 170 l/min |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Media temperature | -10 °C … 60 °C |
| Nominal torque | 1.3 Nm |
| Tolerance for nominal tightening torque | ±20% |
| Product weight | 14 g |
| Material seals | NBR |
| Material hollow bolt | Brass nickel-plated |
| Material release ring | POM |
| Material knurled head | Wrought aluminium alloy anodised |
| Material adjusting screw | Brass |
| Material nut | Wrought aluminium alloy |
| Material swivel fitting | Die-cast zinc |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model GRLA-M5-QS-6-RS-D, part number 197578, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies GRLA-M5-QS-6-RS-D as a one-way flow control valve under part number 197578. It lists valve function as Exhaust air one-way flow control function. Confirm the full variant before ordering.
Replacement Compatibility
Before ordering FESTO GRLA-M5-QS-6-RS-D 197578 One-Way Flow Control Valve as a replacement, compare the complete model code with the part currently installed. Check the connection style, mounting dimensions, electrical rating, and any series-specific suffixes. Parts that look alike may operate differently, so confirm the relevant specifications against the equipment requirements before treating them as interchangeable.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | GRLA-M5-QS-6-RS-D |
| Part number | 197578 |
| Product type | One-Way Flow Control Valve |
| Valve function | Exhaust air one-way flow control function |
| Pneumatic connection, port 1 | QS-6 |
| Pneumatic connection, port 2 | M5 |
| Adjustment component | Knurled screw |
| Type of mounting | Screw-in With male thread |
| Standard nominal flow rate in flow control direction | 115 l/min |
| Standard nominal flow rate in blocked direction | 70 l/min … 110 l/min |
| Operating pressure | 0.02 MPa … 1 MPa |






