FESTO JMFH-5-1/8-EX 535912 Solenoid Valve

The FESTO JMFH-5-1/8-EX, part number 535912, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: JMFH-5-1/8-EX Category: Tags: , , Brand:

Description

FESTO JMFH-5-1/8-EX 535912 Solenoid Valve

The FESTO JMFH-5-1/8-EX, part number 535912, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Valve function: 5/2-way, double solenoid.
  • Type of actuation: Electrical.
  • Construction width: 26 mm.

Technical Data

Brand FESTO
Model JMFH-5-1/8-EX
Part number 535912
Product type Solenoid Valve
Valve function 5/2-way, double solenoid
Type of actuation Electrical
Construction width 26 mm
Standard nominal flow rate (standardised to DIN 1343) 600 l/min
pneumatic working port G1/8
Operating voltage Via solenoid coil, must be ordered separately
Operating pressure 0.15 MPa … 0.8 MPa
Operating pressure 1.5 bar … 8 bar
Design Poppet seat
Explosion protection certification outside the EU EPL Db (GB) EPL Gb (GB)
ATEX category gas II 2G
ATEX category dust II 2D
Explosion ignition protection type for gas Ex h IIC T4 Gb
Explosion ignition protection type for dust Ex h IIIC T130°C Db
Explosion ambient temperature -5°C <= Ta <= +40°C
Degree of protection IP65
Nominal size 5 mm
Grid dimension 27 mm
Exhaust-air function Can be throttled
Sealing principle Soft
Mounting position Any
Manual override Detenting
Type of piloting Piloted
Flow direction Non-reversible
lap Underlap
Max. switching frequency 25 Hz
Switching time reversal 10 ms
Max. positive test pulse with 0 signal 2200 µs
Max. negative test pulse with 1 signal 3700 µs
Characteristic coil data See solenoid coil, to be ordered separately
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 1 – Low corrosion stress
Storage temperature -20 °C … 60 °C
Media temperature -5 °C … 40 °C
Ambient temperature -5 °C … 40 °C
Product weight 260 g
Electrical connection Via F coil, to be ordered separately
Type of mounting Either: On manifold rail With through-hole
Breather connection M3
Pilot exhaust port 82 M5
Pilot exhaust port 84 M5
Pneumatic connection, port 1 G1/8
Pneumatic connection, port 2 G1/8
Pneumatic connection, port 3 G1/8
Pneumatic connection, port 4 G1/8
Pneumatic connection, port 5 G1/8
Material seals NBR TPE-U(PU)
Material housing Die-cast aluminium

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model JMFH-5-1/8-EX, part number 535912, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies JMFH-5-1/8-EX as a solenoid valve under part number 535912. It lists valve function as 5/2-way, double solenoid. Confirm the full variant before ordering.

Application Review

When considering this solenoid valve for an industrial application, review the operating conditions of the equipment rather than relying on the product name alone. Confirm the required connections, available space, duty pattern, and surrounding environment. The final selection should follow the complete product specification and the machine manufacturer's requirements.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

JMFH-5-1/8-EX

Part number

535912

Product type

Solenoid Valve

Valve function

5/2-way, double solenoid

Type of actuation

Electrical

Construction width

26 mm

Standard nominal flow rate (standardised to DIN 1343)

600 l/min

pneumatic working port

G1/8

Operating voltage

Via solenoid coil, must be ordered separately

Operating pressure

1.5 bar … 8 bar