FESTO LR-1-D-MAXI-MPA 8002277 Pressure Regulator
The FESTO LR-1-D-MAXI-MPA, part number 8002277, is a pressure regulator. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO LR-1-D-MAXI-MPA 8002277 Pressure Regulator
The FESTO LR-1-D-MAXI-MPA, part number 8002277, is a pressure regulator. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Size: Maxi.
- Series: D.
- Actuator lock: Rotary knob with detent.
Technical Data
| Brand | FESTO |
|---|---|
| Model | LR-1-D-MAXI-MPA |
| Part number | 8002277 |
| Product type | Pressure Regulator |
| Size | Maxi |
| Series | D |
| Actuator lock | Rotary knob with detent |
| Mounting position | Any |
| Design | Piloted piston regulator |
| Controller function | Output pressure constant With secondary exhausting |
| Pressure gauge (ANALOG) or Pressure display (DIGITAL) | With pressure gauge |
| Operating pressure | 0 MPa…1.6 MPa 0 bar…16 bar |
| Pressure regulation range | 0.5 bar…12 bar |
| Max. pressure hysteresis | 0.04 MPa 0.4 bar 5.8 psi |
| Standard nominal ow rate (standardised to DIN 1343) | 11500 l/min |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] Inert gas |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Air purity class at output | Compressed air to ISO 8573-1:2010 [7:4:4] Inert gas |
| Media temperature | -10 °C…60 °C |
| Ambient temperature | -10 °C…60 °C |
| Product weight | 800 g |
| Type of mounting | Front panel mounting Inline installation With accessories |
| Pneumatic connection, port 1 | G1 |
| Pneumatic connection, port 2 | G1 |
| Material sub-base | Die-cast zinc |
| Material seals | NBR |
| Material housing | Die-cast zinc |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model LR-1-D-MAXI-MPA, part number 8002277, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies LR-1-D-MAXI-MPA as a pressure regulator under part number 8002277. It lists size as Maxi. Confirm the full variant before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | LR-1-D-MAXI-MPA |
| Part number | 8002277 |
| Product type | Pressure Regulator |
| Size | Maxi |
| Series | D |
| Actuator lock | Rotary knob with detent |
| Mounting position | Any |
| Design | Piloted piston regulator |
| Controller function | Output pressure constant With secondary exhausting |
| Pressure gauge (ANALOG) or Pressure display (DIGITAL) | With pressure gauge |
| Operating pressure | 0 MPa…1.6 MPa 0 bar…16 bar |





