FESTO MFH-5/3G-1/8-B 30484 Solenoid Valve

The FESTO MFH-5/3G-1/8-B, part number 30484, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: MFH-5/3G-1/8-B Category: Tags: , , Brand:

Description

FESTO MFH-5/3G-1/8-B 30484 Solenoid Valve

The FESTO MFH-5/3G-1/8-B, part number 30484, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Valve function: 5/3-way, closed.
  • Type of actuation: Electrical.
  • Construction width: 26 mm.

Technical Data

Brand FESTO
Model MFH-5/3G-1/8-B
Part number 30484
Product type Solenoid Valve
Valve function 5/3-way, closed
Type of actuation Electrical
Construction width 26 mm
Standard nominal flow rate (standardised to DIN 1343) 1000 l/min
pneumatic working port G1/8
Operating pressure 0.3 MPa … 1 MPa
Operating pressure 3 bar … 10 bar
Design Piston gate valve
Type of reset Mechanical spring
Nominal size 8 mm
Sealing principle Soft
Mounting position Any
Manual override Non-detenting
Type of piloting Piloted
Pilot air supply Internal
Flow direction Non-reversible
lap Overlap
Max. switching frequency 3 Hz
Switching time off 30 ms
Switching time on 23 ms
Switching time reversal 23 ms
Max. positive test pulse with 0 signal 2200 µs
Max. negative test pulse with 1 signal 3700 µs
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 1 – Low corrosion stress
Storage temperature -40 °C … 60 °C
Media temperature -10 °C … 60 °C
Ambient temperature -5 °C … 40 °C
Product weight 400 g
Electrical connection Via F coil, to be ordered separately
Type of mounting Either: On PR rail With through-hole
Pilot exhaust port 82 M5
Pilot exhaust port 84 M5
Pneumatic connection, port 1 G1/8
Pneumatic connection, port 2 G1/8
Pneumatic connection, port 3 G1/8
Pneumatic connection, port 4 G1/8
Pneumatic connection, port 5 G1/8
Material seals NBR
Material housing Die-cast aluminium

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model MFH-5/3G-1/8-B, part number 30484, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies MFH-5/3G-1/8-B as a solenoid valve under part number 30484. It lists valve function as 5/3-way, closed. Confirm the full variant before ordering.

Installation Preparation

Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.

Payment Arrangements

The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.

Additional information

Brand

FESTO

Model

MFH-5/3G-1/8-B

Part number

30484

Product type

Solenoid Valve

Valve function

5/3-way, closed

Type of actuation

Electrical

Construction width

26 mm

Standard nominal flow rate (standardised to DIN 1343)

1000 l/min

pneumatic working port

G1/8

Operating pressure

3 bar … 10 bar

Design

Piston gate valve