FESTO MHA1-2X2/2G-1,5-3-3-3 562051 Vacuum Valve

The Festo MHA1-2X2/2G-1,5-3-3-3 (part number 562051) is a vacuum valve. Its product datasheet lists valve function as 2×2/2 closed monostable and standard nominal flow rate (standardised to din 1343) as 30 l/min.

SKU: 562051 Category: Tags: , , Brand:

Description

FESTO MHA1-2X2/2G-1,5-3-3-3 562051 Vacuum Valve

The Festo MHA1-2X2/2G-1,5-3-3-3 (part number 562051) is a vacuum valve. Its product datasheet lists valve function as 2×2/2 closed monostable and standard nominal flow rate (standardised to din 1343) as 30 l/min.

Key Features

  • Valve function: 2×2/2 closed monostable
  • Standard nominal flow rate (standardised to DIN 1343): 30 l/min
  • pneumatic working port: QS-3
  • Operating voltage: 24 V DC

Technical Data

Brand FESTO
Model MHA1-2X2/2G-1,5-3-3-3
Part number 562051
Valve function 2×2/2 closed monostable
Type of actuation Electrical
Construction width 20 mm
Standard nominal flow rate (standardised to DIN 1343) 30 l/min
pneumatic working port QS-3
Operating voltage 24 V DC
Operating pressure 0 bar … 1.5 bar
Type of reset Mechanical spring
Degree of protection IP40
Nominal size 1.5 mm
Grid dimension 20 mm
Exhaust-air function Cannot be throttled
Sealing principle Soft
Mounting position Any
Manual override Non-detenting
Type of piloting Direct
Flow direction Non-reversible
lap Underlap
Signal status display LED
Operating pressure, reversible -0.95 bar … 0 bar
Suitability for vacuum Yes
Standard flow rate (standardised to DIN 1343) 30 l/min
Max. switching frequency 10 Hz
Switching time off 6 ms
Switching time on 6 ms
Duty cycle 100%
Characteristic coil data 24 V DC: low-current phase 0.7 W, high-current phase 3.0 W
Permissible voltage fluctuations +/-10%
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will
always be required)
Vibration resistance Transport application test with severity level 2 to FN 942017-4 and EN
60068-2-6
Shock resistance Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC 2 – Moderate corrosion stress
Storage temperature -20 °C … 60 °C
Media temperature -5 °C … 50 °C
Ambient temperature -5 °C … 50 °C
Product weight 30.6 g
Max. cable length 30 M
Electrical connection Plug KMH
Type of mounting With through-hole
Pneumatic connection, port 1 QS-3
Pneumatic connection, port 11 QS-3
Pneumatic connection, port 2 QS-3
Note on materials RoHS compliant
Material seals Fluoro rubber
HNBR
NBR
Material housing Reinforced PPS
Material screws Steel

Application Notes

Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.

Selection and Installation

Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.

Inquiry

For a quotation or replacement enquiry, provide model MHA1-2X2/2G-1,5-3-3-3, part number 562051, quantity, destination and clear photos of the original unit when available.

Datasheet Selection Note

Festo lists pneumatic working port as QS-3 for part number 562051. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.

Installation Preparation

Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.

International Delivery Options

We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.

Additional information

Brand

FESTO

Model

MHA1-2X2/2G-1,5-3-3-3

Part Number

562051

Valve function

2×2/2 closed monostable

Type of actuation

Electrical

Construction width

20 mm

Standard nominal flow rate (standardised to DIN 1343)

30 l/min

pneumatic working port

QS-3

Operating voltage

24 V DC

Operating pressure

0 bar … 1.5 bar

Type of reset

Mechanical spring