FESTO MHA1-M1LCH-2/2G-1.5-HC 557864 Solenoid Valve
The Festo MHA1-M1LCH-2/2G-1.5-HC (part number 557864) is a solenoid valve. Its product datasheet lists valve function as 2/2-way, single solenoid, closed and standard nominal flow rate (standardised to din 1343) as 30 l/min.
Description
FESTO MHA1-M1LCH-2/2G-1.5-HC 557864 Solenoid Valve
The Festo MHA1-M1LCH-2/2G-1.5-HC (part number 557864) is a solenoid valve. Its product datasheet lists valve function as 2/2-way, single solenoid, closed and standard nominal flow rate (standardised to din 1343) as 30 l/min.
Key Features
- Valve function: 2/2-way, single solenoid, closed
- Standard nominal flow rate (standardised to DIN 1343): 30 l/min
- pneumatic working port: Sub-base
- Operating voltage: 24 V DC
Technical Data
| Brand | FESTO |
|---|---|
| Model | MHA1-M1LCH-2/2G-1.5-HC |
| Part number | 557864 |
| Valve function | 2/2-way, single solenoid, closed |
| Type of actuation | Electrical |
| Construction width | 10 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 30 l/min |
| pneumatic working port | Sub-base |
| Operating voltage | 24 V DC |
| Operating pressure | 0 bar … 1.5 bar |
| Design | Poppet valve with spring return |
| Type of reset | Mechanical spring |
| Degree of protection | IP40 |
| Nominal size | 1.5 mm |
| Grid dimension | 10 mm |
| Exhaust-air function | Cannot be throttled |
| Sealing principle | Soft |
| Mounting position | Any |
| Manual override | Non-detenting |
| Type of piloting | Direct |
| Flow direction | Non-reversible |
| Signal status display | LED |
| Operating pressure, reversible | -0.95 bar … 0 bar |
| Suitability for vacuum | Yes |
| Standard flow rate (standardised to DIN 1343) | 30 l/min |
| Max. switching frequency | 10 Hz |
| Switching time off | 6 ms |
| Switching time on | 6 ms |
| Duty cycle | 100% |
| Characteristic coil data | 24 V DC: low-current phase 0.7 W, high-current phase 3.0 W |
| Permissible voltage fluctuations | +/-10% |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 2 – Moderate corrosion stress |
| Cleanroom suitability, measured according to ISO 14644-14 | Class 5 according to ISO 14644-1 |
| Storage temperature | -20 °C … 60 °C |
| Media temperature | -5 °C … 50 °C |
| Ambient temperature | -5 °C … 50 °C |
| Product weight | 10 g |
| Max. cable length | 30 M |
| Electrical connection | Plug KMH |
| Type of mounting | On sub-base |
| Pneumatic connection, port 1 | Sub-base |
| Pneumatic connection, port 11 | Sub-base |
| Pneumatic connection, port 2 | Sub-base |
| Note on materials | RoHS compliant |
| Material seals | Fluoro rubber HNBR NBR |
| Material housing | Reinforced PPS |
| Material screws | Steel |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model MHA1-M1LCH-2/2G-1.5-HC, part number 557864, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists pneumatic working port as Sub-base for part number 557864. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Replacement Compatibility
Before ordering FESTO MHA1-M1LCH-2/2G-1.5-HC 557864 Solenoid Valve as a replacement, compare the complete model code with the part currently installed. Check the connection style, mounting dimensions, electrical rating, and any series-specific suffixes. Parts that look alike may operate differently, so confirm the relevant specifications against the equipment requirements before treating them as interchangeable.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Brand | FESTO |
|---|---|
| Model | MHA1-M1LCH-2/2G-1.5-HC |
| Part Number | 557864 |
| Valve function | 2/2-way, single solenoid, closed |
| Type of actuation | Electrical |
| Construction width | 10 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 30 l/min |
| pneumatic working port | Sub-base |
| Operating voltage | 24 V DC |
| Operating pressure | 0 bar … 1.5 bar |
| Design | Poppet valve with spring return |









