FESTO MHE2-MS1H-3/2G-M7 196131 Solenoid Valve

The FESTO MHE2-MS1H-3/2G-M7, part number 196131, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: MHE2-MS1H-3/2G-M7 Category: Tags: , , Brand:

Description

FESTO MHE2-MS1H-3/2G-M7 196131 Solenoid Valve

The FESTO MHE2-MS1H-3/2G-M7, part number 196131, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Valve function: 3/2-way, single solenoid, closed.
  • Type of actuation: Electrical.
  • Construction width: 10 mm.

Technical Data

Brand FESTO
Model MHE2-MS1H-3/2G-M7
Part number 196131
Product type Solenoid Valve
Valve function 3/2-way, single solenoid, closed
Type of actuation Electrical
Construction width 10 mm
Standard nominal flow rate (standardised to DIN 1343) 100 l/min
pneumatic working port M7
Operating voltage 24 V DC
Operating pressure -0.09 MPa … 0.8 MPa
Operating pressure -0.9 bar … 8 bar
Operating pressure -13.05 psi … 116 psi
Design Pressure relief poppet valve
Type of reset Mechanical spring
Degree of protection IP65
Nominal size 2 mm
Grid dimension 14 mm
Note on grid dimension Minimum distance between the valves is 4 mm
Exhaust-air function Can be throttled
Sealing principle Soft
Mounting position Any
Manual override Non-detenting
Type of piloting Direct
Flow direction Reversible with restrictions
lap Underlap
Reverse polarity protection Bipolar
Additional functions Spark arresting Holding current reduction Protective circuit
Operating pressure, reversible -0.09 MPa … 0.1 MPa
Operating pressure, reversible -0.9 bar … 1 bar
Operating pressure, reversible -13.05 psi … 14.5 psi
Max. switching frequency 330 Hz
Switching time off 2 ms
Switching time on 1.7 ms
Tolerance switching time off +10%/-30%
Tolerance switching time on +10%/-30%
Switching time dispersion from 1 Hz 0.2 ms
Duty cycle 100%
Characteristic coil data 24 V DC: low-current phase 1.25 W, high-current phase 5.0 W
Permissible voltage fluctuations +/-10%
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Vibration resistance Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Restrictions for environmental and media temperature As a function of switching frequency (see graph)
Shock resistance Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC 2 – Moderate corrosion stress
Media temperature -5 °C … 60 °C
Ambient temperature -5 °C … 60 °C
Product weight 60 g
Electrical connection 2-pin Plug
Type of mounting With through-hole
Pneumatic connection, port 1 M7
Pneumatic connection, port 2 M7
Pneumatic connection, port 3 M7
Material seals HNBR NBR
Material housing Die-cast zinc, coated
Material screws Galvanised steel

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model MHE2-MS1H-3/2G-M7, part number 196131, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies MHE2-MS1H-3/2G-M7 as a solenoid valve under part number 196131. It lists valve function as 3/2-way, single solenoid, closed. Confirm the full variant before ordering.

Maintenance Inspection

Before replacing MHE2-MS1H-3/2G-M7, examine the existing installation for issues that may affect the new part. Check the original label, ports, seals, fittings, cables, and mounting points as applicable. Finding a leak, worn connection, or loose contact before installation can help avoid repeating the same problem after replacement.

International Delivery Options

We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.

Additional information

Brand

FESTO

Model

MHE2-MS1H-3/2G-M7

Part number

196131

Product type

Solenoid Valve

Valve function

3/2-way, single solenoid, closed

Type of actuation

Electrical

Construction width

10 mm

Standard nominal flow rate (standardised to DIN 1343)

100 l/min

pneumatic working port

M7

Operating voltage

24 V DC

Operating pressure

-0.9 bar … 8 bar