FESTO MN1H-5/2-D-1-FR-C 159687 Solenoid Valve
The FESTO MN1H-5/2-D-1-FR-C, part number 159687, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO MN1H-5/2-D-1-FR-C 159687 Solenoid Valve
The FESTO MN1H-5/2-D-1-FR-C, part number 159687, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Valve function: 5/2-way, single solenoid.
- Type of actuation: Electrical.
- Construction width: 42 mm.
Technical Data
| Brand | FESTO |
|---|---|
| Model | MN1H-5/2-D-1-FR-C |
| Part number | 159687 |
| Product type | Solenoid Valve |
| Valve function | 5/2-way, single solenoid |
| Type of actuation | Electrical |
| Construction width | 42 mm |
| Standard nominal ow rate (standardised to DIN 1343) | 1200 l/min |
| pneumatic working port | Sub-base size 1 to ISO 5599-1 G1/4 |
| Operating voltage | Via solenoid coil, must be ordered separately |
| Operating pressure | 0.3 MPa…1 MPa 3 bar…10 bar |
| Design | Piston gate valve |
| Type of reset | Mechanical spring |
| Maritime classication | See certicate |
| Certicate issuing authority | DNV-TAA000032X UL MH19482 |
| Degree of protection | IP65 |
| Nominal size | 8 mm |
| Grid dimension | 43 mm |
| Exhaust-air function | Can be throttled |
| Sealing principle | Soft |
| Mounting position | Any |
| Manual override | Detenting via accessory Non-detenting |
| ISO code | 152 |
| Type of piloting | Piloted |
| Pilot air supply | Internal |
| Flow direction | Non-reversible |
| lap | Overlap |
| Suitability for vacuum | No |
| Switching time off | 39 ms |
| Switching time on | 17 ms |
| Max. positive test pulse with 0 signal | 3700 µs |
| Max. negative test pulse with 1 signal | 4600 µs |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Vibration resistance | Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Media temperature | -5 °C…50 °C |
| Sound pressure level | 85 dB(A) |
| Pilot medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Ambient temperature | -5 °C…50 °C |
| Product weight | 450 g |
| Electrical connection | Via N1 coil, to be ordered separately |
| Type of mounting | On sub-base With through-hole |
| Pilot exhaust port 84 | M5 |
| Pilot air port 12 | Sub-base size 1 to ISO 5599-1 |
| Pilot air port 14 | Sub-base size 1 to ISO 5599-1 |
| Pneumatic connection, port 1 | Sub-base size 1 to ISO 5599-1 |
| Pneumatic connection, port 2 | Sub-base size 1 to ISO 5599-1 |
| Pneumatic connection, port 3 | Sub-base size 1 to ISO 5599-1 |
| Pneumatic connection, port 4 | Sub-base size 1 to ISO 5599-1 |
| Pneumatic connection, port 5 | Sub-base size 1 to ISO 5599-1 |
| Material seals | HNBR NBR |
| Material housing | Die-cast aluminium |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model MN1H-5/2-D-1-FR-C, part number 159687, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies MN1H-5/2-D-1-FR-C as a solenoid valve under part number 159687. It lists valve function as 5/2-way, single solenoid. Confirm the full variant before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Brand | FESTO |
|---|---|
| Model | MN1H-5/2-D-1-FR-C |
| Part number | 159687 |
| Product type | Solenoid Valve |
| Valve function | 5/2-way, single solenoid |
| Type of actuation | Electrical |
| Construction width | 42 mm |
| Standard nominal ow rate (standardised to DIN 1343) | 1200 l/min |
| pneumatic working port | Sub-base size 1 to ISO 5599-1 G1/4 |
| Operating voltage | Via solenoid coil, must be ordered separately |
| Operating pressure | 0.3 MPa…1 MPa 3 bar…10 bar |
| Design | Piston gate valve |








