FESTO MN1H-5/3G-D-3-C 159705 Solenoid Valve

The FESTO MN1H-5/3G-D-3-C, part number 159705, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: MN1H-5/3G-D-3-C Category: Tags: , , Brand:

Description

FESTO MN1H-5/3G-D-3-C 159705 Solenoid Valve

The FESTO MN1H-5/3G-D-3-C, part number 159705, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Valve function: 5/3 closed.
  • Type of actuation: Electric.
  • Construction width: 65 mm.

Technical Data

Brand FESTO
Model MN1H-5/3G-D-3-C
Part number 159705
Product type Solenoid Valve
Valve function 5/3 closed
Type of actuation Electric
Construction width 65 mm
Standard nominal ow rate (standardised to DIN 1343) 4100 l/min
pneumatic working port Sub-base size 3 to ISO 5599-1 G1/2
Operating voltage Via solenoid coil, must be ordered separately
Operating pressure 0.3 MPa…1 MPa 3 bar…10 bar
Design Piston gate valve
Type of reset Mechanical spring
Maritime classication See certicate
Certicate issuing authority DNV-TAA000032X UL MH19482
Degree of protection IP65
Nominal size 14.5 mm
Grid dimension 71 mm
Exhaust-air function With ow control option
Sealing principle Soft
Mounting position optional
Manual override Detenting via accessory Non-detenting
ISO code 356
Type of piloting Pilot actuated
Pilot air supply Internal
Flow direction Non-reversible
lap Overlap
Suitability for vacuum no
Switching time off 82 ms
Switching time on 33 ms
Max. positive test pulse with 0 signal 3700 µs
Max. negative test pulse with 1 signal 4600 µs
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Vibration resistance Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6
Shock resistance Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Media temperature -5 °C…50 °C
Sound pressure level 85 dB(A)
Ambient temperature -5 °C…50 °C
Product weight 1170 g
Electrical connection Via N1 coil, to be ordered separately
Type of mounting On sub-base Via through-hole and screw
Pilot exhaust port 82 M5
Pilot exhaust port 84 M5
Pneumatic connection, port 1 Sub-base size 3 to ISO 5599-1
Pneumatic connection, port 2 Sub-base size 3 to ISO 5599-1
Pneumatic connection, port 3 Sub-base size 3 to ISO 5599-1
Pneumatic connection, port 4 Sub-base size 3 to ISO 5599-1
Pneumatic connection, port 5 Sub-base size 3 to ISO 5599-1
Material seals HNBR NBR
Material housing Die-cast aluminium

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model MN1H-5/3G-D-3-C, part number 159705, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies MN1H-5/3G-D-3-C as a solenoid valve under part number 159705. It lists valve function as 5/3 closed. Confirm the full variant before ordering.

Delivery Inspection

Check the product when it arrives and before it is fitted to the machine. Verify the marking against the order, and inspect the visible condition, interfaces, mounting features, and supplied accessories. If the model or physical condition does not match expectations, clarify the discrepancy before installation.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

MN1H-5/3G-D-3-C

Part number

159705

Product type

Solenoid Valve

Valve function

5/3 closed

Type of actuation

Electric

Construction width

65 mm

Standard nominal ow rate (standardised to DIN 1343)

4100 l/min

pneumatic working port

Sub-base size 3 to ISO 5599-1 G1/2

Operating voltage

Via solenoid coil, must be ordered separately

Operating pressure

0.3 MPa…1 MPa 3 bar…10 bar

Design

Piston gate valve