FESTO MPPE-3-1/4-10-010-B 161168 Proportional-Pressure Regulator

The Festo MPPE-3-1/4-10-010-B (part number 161168) is a proportional-pressure regulator. Its product datasheet lists valve function as 3-way proportional-pressure regulator, closed and operating pressure as 1.2 MPa 12 bar.

Description

FESTO MPPE-3-1/4-10-010-B 161168 Proportional-Pressure Regulator

The Festo MPPE-3-1/4-10-010-B (part number 161168) is a proportional-pressure regulator. Its product datasheet lists valve function as 3-way proportional-pressure regulator, closed and operating pressure as 1.2 MPa 12 bar.

Key Features

  • Valve function: 3-way proportional-pressure regulator, closed
  • Operating pressure: 1.2 MPa 12 bar
  • Pneumatic connection, port 1: G1/4
  • Pneumatic connection, port 2: G1/4

Technical Data

Brand FESTO
Model MPPE-3-1/4-10-010-B
Part number 161168
Nominal size, supply 7 mm
Nominal size, exhaust 7 mm
Type of actuation Electric
Sealing principle Soft
Mounting position optional
Design Piloted piston regulator
Short circuit current rating For all electrical connections
Safety instructions Safety position MPPE-B: if the power supply cable is interrupted, output
pressure is maintained unregulated.
Reverse polarity protection For all electrical connections
Valve function 3-way proportional-pressure regulator, closed
Operating pressure 1.2 MPa
12 bar
Pressure regulation range 0 MPa…1 MPa
0 bar…10 bar
Inlet pressure 1 11 bar…12 bar
1.1 MPa…1.2 MPa
Max. pressure hysteresis 0.005 MPa
0.05 bar
Switching time off 280 ms
Switching time on 160 ms
Operational voltage range DC 18 V…30 V
Reference voltage 10 V
Residual ripple 10 %
SETPOINT/ACTUAL values Voltage type 0 – 10 V
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Inert gases
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will
always be required)
KC mark KC-EMV
Corrosion resistance class CRC 2 – Moderate corrosion stress
Media temperature 0 °C…60 °C
Degree of protection IP65
Ambient temperature 0 °C…50 °C
Product weight 920 g
Electrical connection 8-pin
M16x0.75
Plugs
To DIN 45326
Round design
Type of mounting With through-hole
Pneumatic connection, port 1 G1/4
Pneumatic connection, port 2 G1/4
Pneumatic connection, port 3 G1/4
Note on materials RoHS-compliant
Material housing Wrought aluminium alloy
Material membrane NBR

Application Notes

Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.

Selection and Installation

Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.

Inquiry

For a quotation or replacement enquiry, provide model MPPE-3-1/4-10-010-B, part number 161168, quantity, destination and clear photos of the original unit when available.

Datasheet Selection Note

Festo lists pneumatic connection, port 1 as G1/4 for part number 161168. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.

Installation Preparation

Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.

International Delivery Options

We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.

Additional information

Brand

FESTO

Model

MPPE-3-1/4-10-010-B

Part Number

161168

Nominal size, supply

7 mm

Nominal size, exhaust

7 mm

Type of actuation

Electric

Sealing principle

Soft

Mounting position

optional

Design

Piloted piston regulator

Short circuit current rating

For all electrical connections

Safety instructions

Safety position MPPE-B: if the power supply cable is interrupted, output pressure is maintained unregulated.