FESTO MPPES-3-1/8-6-010 187352 Proportional-Pressure Regulator

The Festo MPPES-3-1/8-6-010 (part number 187352) is a proportional-pressure regulator. Its product datasheet lists valve function as 3-way proportional-pressure regulator, closed and operating pressure as ≤0.8 MPa.

Description

FESTO MPPES-3-1/8-6-010 187352 Proportional-Pressure Regulator

The Festo MPPES-3-1/8-6-010 (part number 187352) is a proportional-pressure regulator. Its product datasheet lists valve function as 3-way proportional-pressure regulator, closed and operating pressure as ≤0.8 MPa.

Key Features

  • Valve function: 3-way proportional-pressure regulator, closed
  • Operating pressure: ≤0.8 MPa
  • Pneumatic connection, port 1: G1/8
  • Pneumatic connection, port 2: G1/8

Technical Data

Brand FESTO
Model MPPES-3-1/8-6-010
Part number 187352
Nominal size, supply 3 mm
Nominal size, exhaust 2 mm
Type of actuation Electrical
Sealing principle Soft
Mounting position Any
Design Directly actuated piston regulator
Short circuit current rating For all electrical connections
Safety instructions Safety position MPPES: if the power supply cable is interrupted, the
output pressure drops to 0 bar.
Reverse polarity protection For all electrical connections
Valve function 3-way proportional-pressure regulator, closed
Operating pressure ≤0.8 MPa
Operating pressure ≤8 bar
Pressure regulation range 0 MPa … 0.6 MPa
Pressure regulation range 0 bar … 6 bar
Inlet pressure 1 7 bar … 8 bar
Inlet pressure 1 0.7 MPa … 0.8 MPa
Max. pressure hysteresis 0.001 MPa
Max. pressure hysteresis 0.01 bar
Switching time off 280 ms
Switching time on 210 ms
Operational voltage range DC 18 V … 30 V
Nominal operating voltage DC 24 V
Residual ripple 10%
SETPOINT/ACTUAL values Voltage type 0 – 10 V
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Inert gas
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will
always be required)
KC mark KC-EMV
Corrosion resistance class CRC 2 – Moderate corrosion stress
Media temperature 0 °C … 60 °C
Degree of protection IP65
Ambient temperature 0 °C … 50 °C
Product weight 915 g
Electrical connection 8-pin
M16x0.75
Plug
To DIN 45326
Round design
Type of mounting With through-hole
Pneumatic connection, port 1 G1/8
Pneumatic connection, port 2 G1/8
Pneumatic connection, port 3 G1/8
Note on materials RoHS compliant
Material housing Wrought aluminium alloy
Material membrane NBR

Application Notes

Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.

Selection and Installation

Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.

Inquiry

For a quotation or replacement enquiry, provide model MPPES-3-1/8-6-010, part number 187352, quantity, destination and clear photos of the original unit when available.

Datasheet Selection Note

Festo lists pneumatic connection, port 1 as G1/8 for part number 187352. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.

Functional Check After Replacement

After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.

International Delivery Options

We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.

Additional information

Brand

FESTO

Model

MPPES-3-1/8-6-010

Part Number

187352

Nominal size, supply

3 mm

Nominal size, exhaust

2 mm

Type of actuation

Electrical

Sealing principle

Soft

Mounting position

Any

Design

Directly actuated piston regulator

Short circuit current rating

For all electrical connections

Safety instructions

Safety position MPPES: if the power supply cable is interrupted, the output pressure drops to 0 bar.