FESTO MVH-5-1/8-B 19779 Solenoid Valve
The FESTO MVH-5-1/8-B, part number 19779, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO MVH-5-1/8-B 19779 Solenoid Valve
The FESTO MVH-5-1/8-B, part number 19779, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Valve function: 5/2-way, single solenoid.
- Type of actuation: Electrical.
- Construction width: 26 mm.
Technical Data
| Brand | FESTO |
|---|---|
| Model | MVH-5-1/8-B |
| Part number | 19779 |
| Product type | Solenoid Valve |
| Valve function | 5/2-way, single solenoid |
| Type of actuation | Electrical |
| Construction width | 26 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 750 l/min |
| pneumatic working port | G1/8 |
| Operating voltage | 24 V DC |
| Operating pressure | 0.2 MPa … 1 MPa |
| Operating pressure | 2 bar … 10 bar |
| Design | Poppet seat |
| Type of reset | Mechanical spring |
| Nominal size | 5 mm |
| Sealing principle | Soft |
| Mounting position | Any |
| Manual override | Non-detenting |
| Type of piloting | Piloted |
| Pilot air supply | Internal |
| Flow direction | Non-reversible |
| lap | Underlap |
| b value | 0.34 |
| C value | 3 l/sbar |
| Max. switching frequency | 3 Hz |
| Switching time off | 36 ms |
| Switching time on | 20 ms |
| Max. positive test pulse with 0 signal | 2200 µs |
| Max. negative test pulse with 1 signal | 3700 µs |
| Characteristic coil data | 24 V DC: 2.5 W |
| Permissible voltage fluctuations | +/-10% |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 1 – Low corrosion stress |
| Storage temperature | -40 °C … 60 °C |
| Media temperature | -5 °C … 50 °C |
| Ambient temperature | -5 °C … 50 °C |
| Product weight | 230 g |
| Type of mounting | Either: On PR rail With through-hole |
| Pilot exhaust port 84 | M5 |
| Pneumatic connection, port 1 | G1/8 |
| Pneumatic connection, port 2 | G1/8 |
| Pneumatic connection, port 3 | G1/8 |
| Pneumatic connection, port 4 | G1/8 |
| Pneumatic connection, port 5 | G1/8 |
| Material seals | NBR TPE-U(PU) |
| Material housing | Die-cast aluminium |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model MVH-5-1/8-B, part number 19779, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies MVH-5-1/8-B as a solenoid valve under part number 19779. It lists valve function as 5/2-way, single solenoid. Confirm the full variant before ordering.
Functional Check After Replacement
After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Brand | FESTO |
|---|---|
| Model | MVH-5-1/8-B |
| Part number | 19779 |
| Product type | Solenoid Valve |
| Valve function | 5/2-way, single solenoid |
| Type of actuation | Electrical |
| Construction width | 26 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 750 l/min |
| pneumatic working port | G1/8 |
| Operating voltage | 24 V DC |
| Operating pressure | 2 bar … 10 bar |






