FESTO NPQH-T-G14-Q10-P10 578397 Push-In T-Fitting
The FESTO NPQH-T-G14-Q10-P10, part number 578397, is a push-in t-fitting. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO NPQH-T-G14-Q10-P10 578397 Push-In T-Fitting
The FESTO NPQH-T-G14-Q10-P10, part number 578397, is a push-in t-fitting. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Size: Standard.
- Nominal size: 8 mm.
- Tubing insertion depth: 18.3 mm.
Technical Data
| Brand | FESTO |
|---|---|
| Model | NPQH-T-G14-Q10-P10 |
| Part number | 578397 |
| Product type | Push-In T-Fitting |
| Size | Standard |
| Nominal size | 8 mm |
| Tubing insertion depth | 18.3 mm |
| Type of seal on screwed plug | Sealing ring |
| Mounting position | Any |
| Design | T-shape |
| Design | Push-pull principle |
| Operating pressure complete temperature range | -0.095 MPa … 2 MPa |
| Operating pressure complete temperature range | -0.95 bar … 20 bar |
| Operating pressure complete temperature range | -13.775 psi … 290 psi |
| Note on operating pressure | Water: max. 0.6 MPa at 0 – 50 °C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] Water (liquid, ice-free) |
| Note on operating and pilot medium | Lubricated operation possible |
| Corrosion resistance class CRC | 3 – high corrosion stress |
| Suitable for use with food | See declaration of conformity NSF/ANSI 169 |
| Ambient temperature | 0 °C … 150 °C |
| Nominal torque | 7.5 Nm |
| Tolerance for nominal tightening torque | ±20% |
| Product weight | 44.4 g |
| Type of mounting | External hex SW16 |
| Pneumatic connection, port 1 | Male thread G1/4 |
| Pneumatic connection, port 2 | For tubing outside diameter of 10 mm |
| Colour of release ring | Silver |
| Material housing | Brass, chemically nickel-plated |
| Material thread seal | Fluoro rubber |
| Guard ring material | PEI |
| Material release ring | Chemically nickel-plated brass |
| Material tubing seal | Fluoro rubber |
| Material tubing clamp component | High-alloy stainless steel |
| Thrust ring material | PEI |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model NPQH-T-G14-Q10-P10, part number 578397, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies NPQH-T-G14-Q10-P10 as a push-in t-fitting under part number 578397. It lists size as Standard. Confirm the full variant before ordering.
Functional Check After Replacement
After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | NPQH-T-G14-Q10-P10 |
| Part number | 578397 |
| Product type | Push-In T-Fitting |
| Size | Standard |
| Nominal size | 8 mm |
| Tubing insertion depth | 18.3 mm |
| Type of seal on screwed plug | Sealing ring |
| Mounting position | Any |
| Design | Push-pull principle |
| Operating pressure complete temperature range | -0.095 MPa … 2 MPa |







