FESTO QS-1/2-16 153011 Push-In Fitting

The FESTO QS-1/2-16, part number 153011, is a push-in fitting. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: QS-1/2-16 Category: Tags: , , Brand:

Description

FESTO QS-1/2-16 153011 Push-In Fitting

The FESTO QS-1/2-16, part number 153011, is a push-in fitting. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Size: Standard.
  • Nominal size: 13 mm.
  • Tubing insertion depth: 24.8 mm.

Technical Data

Brand FESTO
Model QS-1/2-16
Part number 153011
Product type Push-In Fitting
Size Standard
Nominal size 13 mm
Tubing insertion depth 24.8 mm
Type of seal on screwed plug Coating
Mounting position Any
Design Straight design
Design Push-pull principle
Operating pressure complete temperature range -0.095 MPa … 0.6 MPa
Operating pressure complete temperature range -0.95 bar … 6 bar
Operating pressure complete temperature range -13.775 psi … 87 psi
Temperature-dependent operating pressure -0.095 MPa … 1.4 MPa
Temperature-dependent operating pressure -0.95 bar … 14 bar
Temperature-dependent operating pressure -13.775 psi … 203 psi
Note on operating pressure Water: max. 0.6 MPa at max. 50°C
Operating medium Compressed air to ISO 8573-1:2010 [7:-:-] Water (liquid, ice-free)
Note on operating and pilot medium Lubricated operation possible
Corrosion resistance class CRC 1 – Low corrosion stress
Ambient temperature -10 °C … 80 °C
Product weight 63 g
Type of mounting External hex SW24
Pneumatic connection, port 1 Male thread R1/2
Pneumatic connection, port 2 For tubing outside diameter of 16 mm
Colour of release ring Blue
Material housing Brass, nickel-plated
Material release ring POM
Material tubing seal NBR
Material tubing clamp component High-alloy stainless steel

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model QS-1/2-16, part number 153011, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies QS-1/2-16 as a push-in fitting under part number 153011. It lists size as Standard. Confirm the full variant before ordering.

Delivery Inspection

Check the product when it arrives and before it is fitted to the machine. Verify the marking against the order, and inspect the visible condition, interfaces, mounting features, and supplied accessories. If the model or physical condition does not match expectations, clarify the discrepancy before installation.

International Delivery Options

We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.

Additional information

Brand

FESTO

Model

QS-1/2-16

Part number

153011

Product type

Push-In Fitting

Size

Standard

Nominal size

13 mm

Tubing insertion depth

24.8 mm

Type of seal on screwed plug

Coating

Mounting position

Any

Design

Push-pull principle

Operating pressure complete temperature range

-0.095 MPa … 0.6 MPa