FESTO QS-4 153031 Push-In Connector
The FESTO QS-4, part number 153031, is a push-in connector. Its exact-model datasheet lists pneumatic connection, port 1 as For tubing outer diameter of 4 mm and pneumatic connection, port 2 as For tubing outside diameter of 4 mm.
Description
FESTO QS-4 153031 Push-In Connector
The FESTO QS-4, part number 153031, is a push-in connector. Its exact-model datasheet lists pneumatic connection, port 1 as For tubing outer diameter of 4 mm and pneumatic connection, port 2 as For tubing outside diameter of 4 mm.
Key Features
- Pneumatic connection, port 1: For tubing outer diameter of 4 mm.
- Pneumatic connection, port 2: For tubing outside diameter of 4 mm.
- Nominal size: 2.8 mm.
Technical Data
| Brand | FESTO |
|---|---|
| Model | QS-4 |
| Part number | 153031 |
| Product type | Push-In Connector |
| Size | Standard |
| Nominal size | 2.8 mm |
| Tubing insertion depth | 14.9 mm |
| Mounting position | Any |
| Design | Straight design |
| Design | Push-pull principle |
| Operating pressure complete temperature range | -0.095 MPa … 0.6 MPa |
| Operating pressure complete temperature range | -0.95 bar … 6 bar |
| Operating pressure complete temperature range | -13.775 psi … 87 psi |
| Temperature-dependent operating pressure | -0.095 MPa … 1.4 MPa |
| Temperature-dependent operating pressure | -0.95 bar … 14 bar |
| Temperature-dependent operating pressure | -13.775 psi … 203 psi |
| Note on operating pressure | Water: max. 0.6 MPa at max. 50°C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] Water (liquid, ice-free) |
| Note on operating and pilot medium | Lubricated operation possible |
| Corrosion resistance class CRC | 1 – Low corrosion stress |
| Ambient temperature | -10 °C … 80 °C |
| Product weight | 4.7 g |
| Pneumatic connection, port 1 | For tubing outer diameter of 4 mm |
| Pneumatic connection, port 2 | For tubing outside diameter of 4 mm |
| Colour of release ring | Blue |
| Material housing | PBT |
| Material release ring | POM |
| Material tubing seal | NBR |
| Material tubing clamp component | High-alloy stainless steel |
Application Notes
Check the complete model and part number against the original equipment. Items in the same series may differ in dimensions, connections or operating configuration.
Selection and Installation
Confirm the selected variant and installation requirements with the equipment documentation. Follow the manufacturer instructions for service and commissioning.
Inquiry
For a quotation, provide model QS-4, part number 153031, quantity and destination. Clear photos of the existing item or package can help confirm the selection.
Exact-Model Datasheet Check
The Festo datasheet for QS-4, part number 153031, confirms pneumatic connection, port 1 as For tubing outer diameter of 4 mm. Check installation and connection details against the existing equipment before replacement.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | QS-4 |
| Part Number | 153031 |
| Product Type | Push-In Connector |
| Size | Standard |
| Nominal size | 2.8 mm |
| Tubing insertion depth | 14.9 mm |
| Mounting position | Any |
| Design | Push-pull principle |
| Operating pressure complete temperature range | -0.95 bar … 6 bar |







