FESTO QS-G3/8-8-50 132043 Push-In Fitting

The FESTO QS-G3/8-8-50, part number 132043, is a push-in fitting. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: QS-G3/8-8-50 Category: Tags: , , Brand:

Description

FESTO QS-G3/8-8-50 132043 Push-In Fitting

The FESTO QS-G3/8-8-50, part number 132043, is a push-in fitting. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Size: Standard.
  • Nominal size: 7 mm.
  • Tubing insertion depth: 18.2 mm.

Technical Data

Brand FESTO
Model QS-G3/8-8-50
Part number 132043
Product type Push-In Fitting
Size Standard
Nominal size 7 mm
Tubing insertion depth 18.2 mm
Type of seal on screwed plug Sealing ring
Mounting position Any
Design Straight design
Design Push-pull principle
Operating pressure complete temperature range -0.095 MPa … 0.6 MPa
Operating pressure complete temperature range -0.95 bar … 6 bar
Operating pressure complete temperature range -13.775 psi … 87 psi
Temperature-dependent operating pressure -0.095 MPa … 1.4 MPa
Temperature-dependent operating pressure -0.95 bar … 14 bar
Temperature-dependent operating pressure -13.775 psi … 203 psi
Note on operating pressure Water: max. 0.6 MPa at max. 50°C
Operating medium Compressed air to ISO 8573-1:2010 [7:-:-] Water (liquid, ice-free)
Note on operating and pilot medium Lubricated operation possible Water: G-thread only possible with sealing ring type OL as additional accessory
Corrosion resistance class CRC 1 – Low corrosion stress
Ambient temperature -10 °C … 80 °C
Nominal torque 15.5 Nm
Tolerance for nominal tightening torque ±20%
Product weight 22 g
Type of mounting External hex SW19
Pneumatic connection, port 1 Male thread G3/8
Pneumatic connection, port 2 For tubing outside diameter of 8 mm
Colour of release ring Blue
Material housing Brass, nickel-plated
Material release ring POM
Material tubing seal NBR
Material tubing clamp component High-alloy stainless steel

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model QS-G3/8-8-50, part number 132043, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies QS-G3/8-8-50 as a push-in fitting under part number 132043. It lists size as Standard. Confirm the full variant before ordering.

Replacement Compatibility

Before ordering FESTO QS-G3/8-8-50 132043 Push-In Fitting as a replacement, compare the complete model code with the part currently installed. Check the connection style, mounting dimensions, electrical rating, and any series-specific suffixes. Parts that look alike may operate differently, so confirm the relevant specifications against the equipment requirements before treating them as interchangeable.

International Delivery Options

We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.

Additional information

Brand

FESTO

Model

QS-G3/8-8-50

Part number

132043

Product type

Push-In Fitting

Size

Standard

Nominal size

7 mm

Tubing insertion depth

18.2 mm

Type of seal on screwed plug

Sealing ring

Mounting position

Any

Design

Push-pull principle

Operating pressure complete temperature range

-0.095 MPa … 0.6 MPa