FESTO QSK-1/4-8 153423 Push-In Fitting, Self-Sealing

The FESTO QSK-1/4-8, part number 153423, is a push-in fitting, self-sealing. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: QSK-1/4-8 Category: Tags: , , Brand:

Description

FESTO QSK-1/4-8 153423 Push-In Fitting, Self-Sealing

The FESTO QSK-1/4-8, part number 153423, is a push-in fitting, self-sealing. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Size: Standard.
  • Nominal size: 4.3 mm.
  • Approved tubing type: PAN- PAN-MF- PAN-R- PAN-V0- PEN- PFAN- PLN- PTFEN- PUN- PUN-CM- PUN-DUO- PUN-H- PUN-H-DUO- PUN-S- PUN-S-DUO- PUN-V0-.

Technical Data

Brand FESTO
Model QSK-1/4-8
Part number 153423
Product type Push-In Fitting, Self-Sealing
Size Standard
Nominal size 4.3 mm
Approved tubing type PAN- PAN-MF- PAN-R- PAN-V0- PEN- PFAN- PLN- PTFEN- PUN- PUN-CM- PUN-DUO- PUN-H- PUN-H-DUO- PUN-S- PUN-S-DUO- PUN-V0-
Tubing insertion depth 18.5 mm
Type of seal on screwed plug Coating
Mounting position Any
Design Straight design
Design Push-pull principle
Operating pressure complete temperature range -0.095 MPa … 0.6 MPa
Operating pressure complete temperature range -0.95 bar … 6 bar
Operating pressure complete temperature range -13.775 psi … 87 psi
Temperature-dependent operating pressure -0.095 MPa … 1.4 MPa
Temperature-dependent operating pressure -0.95 bar … 14 bar
Temperature-dependent operating pressure -13.775 psi … 203 psi
Operating medium Compressed air to ISO 8573-1:2010 [7:-:-]
Note on operating and pilot medium Lubricated operation possible
Corrosion resistance class CRC 1 – Low corrosion stress
Ambient temperature -10 °C … 80 °C
Nominal torque 9 Nm
Tolerance for nominal tightening torque ±20%
Product weight 22.5 g
Type of mounting External hex SW14
Pneumatic connection, port 1 Male thread R1/4
Pneumatic connection, port 2 For tubing outside diameter of 8 mm
Colour of release ring Blue
Material housing Brass, nickel-plated
Material release ring POM
Material tubing seal NBR
Material tubing clamp component High-alloy stainless steel

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model QSK-1/4-8, part number 153423, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies QSK-1/4-8 as a push-in fitting, self-sealing under part number 153423. It lists size as Standard. Confirm the full variant before ordering.

Maintenance Inspection

Before replacing QSK-1/4-8, examine the existing installation for issues that may affect the new part. Check the original label, ports, seals, fittings, cables, and mounting points as applicable. Finding a leak, worn connection, or loose contact before installation can help avoid repeating the same problem after replacement.

Payment Arrangements

The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.

Additional information

Brand

FESTO

Model

QSK-1/4-8

Part number

153423

Product type

Push-In Fitting, Self-Sealing

Size

Standard

Nominal size

4.3 mm

Approved tubing type

PAN- PAN-MF- PAN-R- PAN-V0- PEN- PFAN- PLN- PTFEN- PUN- PUN-CM- PUN-DUO- PUN-H- PUN-H-DUO- PUN-S- PUN-S-DUO- PUN-V0-

Tubing insertion depth

18.5 mm

Type of seal on screwed plug

Coating

Mounting position

Any

Design

Push-pull principle