FESTO QSL-G1/8-6-100 132049 Push-In L-Fitting
The FESTO QSL-G1/8-6-100, part number 132049, is a push-in l-fitting. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO QSL-G1/8-6-100 132049 Push-In L-Fitting
The FESTO QSL-G1/8-6-100, part number 132049, is a push-in l-fitting. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Size: Standard.
- Nominal size: 4.2 mm.
- Tubing insertion depth: 17 mm.
Technical Data
| Brand | FESTO |
|---|---|
| Model | QSL-G1/8-6-100 |
| Part number | 132049 |
| Product type | Push-In L-Fitting |
| Size | Standard |
| Nominal size | 4.2 mm |
| Tubing insertion depth | 17 mm |
| Type of seal on screwed plug | Sealing ring |
| Mounting position | Any |
| Design | L-shape |
| Design | Push-pull principle |
| Operating pressure complete temperature range | -0.095 MPa … 0.6 MPa |
| Operating pressure complete temperature range | -0.95 bar … 6 bar |
| Operating pressure complete temperature range | -13.775 psi … 87 psi |
| Temperature-dependent operating pressure | -0.095 MPa … 1.4 MPa |
| Temperature-dependent operating pressure | -0.95 bar … 14 bar |
| Temperature-dependent operating pressure | -13.775 psi … 203 psi |
| Note on operating pressure | Water: max. 0.6 MPa at max. 50°C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] Water (liquid, ice-free) |
| Note on operating and pilot medium | Lubricated operation possible Water: G-thread only possible with sealing ring type OL as additional accessory |
| Corrosion resistance class CRC | 1 – Low corrosion stress |
| Ambient temperature | -10 °C … 80 °C |
| Nominal torque | 5.4 Nm |
| Tolerance for nominal tightening torque | ±20% |
| Product weight | 14 g |
| Type of mounting | External hex SW13 |
| Pneumatic connection, port 1 | Male thread G1/8 |
| Pneumatic connection, port 2 | For tubing outside diameter of 6 mm |
| Colour of release ring | Blue |
| Material screwed plug | Nickel-plated brass |
| Material housing | PBT |
| Material release ring | POM |
| Material tubing seal | NBR |
| Material tubing clamp component | High-alloy stainless steel |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model QSL-G1/8-6-100, part number 132049, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies QSL-G1/8-6-100 as a push-in l-fitting under part number 132049. It lists size as Standard. Confirm the full variant before ordering.
Delivery Inspection
Check the product when it arrives and before it is fitted to the machine. Verify the marking against the order, and inspect the visible condition, interfaces, mounting features, and supplied accessories. If the model or physical condition does not match expectations, clarify the discrepancy before installation.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Brand | FESTO |
|---|---|
| Model | QSL-G1/8-6-100 |
| Part number | 132049 |
| Product type | Push-In L-Fitting |
| Size | Standard |
| Nominal size | 4.2 mm |
| Tubing insertion depth | 17 mm |
| Type of seal on screwed plug | Sealing ring |
| Mounting position | Any |
| Design | Push-pull principle |
| Operating pressure complete temperature range | -0.095 MPa … 0.6 MPa |





