FESTO QSL-G3/8-8-50 132055 Push-In L-Fitting
The FESTO QSL-G3/8-8-50, part number 132055, is a push-in l-fitting. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO QSL-G3/8-8-50 132055 Push-In L-Fitting
The FESTO QSL-G3/8-8-50, part number 132055, is a push-in l-fitting. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Size: Standard.
- Nominal size: 6.7 mm.
- Tubing insertion depth: 18.1 mm.
Technical Data
| Brand | FESTO |
|---|---|
| Model | QSL-G3/8-8-50 |
| Part number | 132055 |
| Product type | Push-In L-Fitting |
| Size | Standard |
| Nominal size | 6.7 mm |
| Tubing insertion depth | 18.1 mm |
| Type of seal on screwed plug | Sealing ring |
| Mounting position | Any |
| Design | L-shape |
| Design | Push-pull principle |
| Operating pressure complete temperature range | -0.095 MPa … 0.6 MPa |
| Operating pressure complete temperature range | -0.95 bar … 6 bar |
| Operating pressure complete temperature range | -13.775 psi … 87 psi |
| Temperature-dependent operating pressure | -0.095 MPa … 1.4 MPa |
| Temperature-dependent operating pressure | -0.95 bar … 14 bar |
| Temperature-dependent operating pressure | -13.775 psi … 203 psi |
| Note on operating pressure | Water: max. 0.6 MPa at max. 50°C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] Water (liquid, ice-free) |
| Note on operating and pilot medium | Lubricated operation possible Water: G-thread only possible with sealing ring type OL as additional accessory |
| Corrosion resistance class CRC | 1 – Low corrosion stress |
| Ambient temperature | -10 °C … 80 °C |
| Nominal torque | 15.5 Nm |
| Tolerance for nominal tightening torque | ±20% |
| Product weight | 30 g |
| Type of mounting | External hex SW20 |
| Pneumatic connection, port 1 | Male thread G3/8 |
| Pneumatic connection, port 2 | For tubing outside diameter of 8 mm |
| Colour of release ring | Blue |
| Material screwed plug | Nickel-plated brass |
| Material housing | PBT |
| Material release ring | POM |
| Material tubing seal | NBR |
| Material tubing clamp component | High-alloy stainless steel |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model QSL-G3/8-8-50, part number 132055, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies QSL-G3/8-8-50 as a push-in l-fitting under part number 132055. It lists size as Standard. Confirm the full variant before ordering.
Full Model Verification
Use the full model code when confirming FESTO QSL-G3/8-8-50 132055 Push-In L-Fitting. A shared series name does not mean two versions have the same voltage, port size, material, or mounting arrangement. Compare the original nameplate with the available datasheet, equipment records, and installation details to identify the exact version required.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | QSL-G3/8-8-50 |
| Part number | 132055 |
| Product type | Push-In L-Fitting |
| Size | Standard |
| Nominal size | 6.7 mm |
| Tubing insertion depth | 18.1 mm |
| Type of seal on screwed plug | Sealing ring |
| Mounting position | Any |
| Design | Push-pull principle |
| Operating pressure complete temperature range | -0.095 MPa … 0.6 MPa |







