FESTO QSM-M5-4-100 130778 Push-In Fitting

The FESTO QSM-M5-4-100, part number 130778, is a push-in fitting. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: QSM-M5-4-100 Category: Tags: , , Brand:

Description

FESTO QSM-M5-4-100 130778 Push-In Fitting

The FESTO QSM-M5-4-100, part number 130778, is a push-in fitting. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Size: Mini.
  • Nominal size: 2.2 mm.
  • Tubing insertion depth: 11.5 mm.

Technical Data

Brand FESTO
Model QSM-M5-4-100
Part number 130778
Product type Push-In Fitting
Size Mini
Nominal size 2.2 mm
Tubing insertion depth 11.5 mm
Type of seal on screwed plug Sealing ring
Mounting position Any
Design Straight design
Design Push-pull principle
Operating pressure complete temperature range -0.095 MPa … 0.6 MPa
Operating pressure complete temperature range -0.95 bar … 6 bar
Operating pressure complete temperature range -13.775 psi … 87 psi
Temperature-dependent operating pressure -0.095 MPa … 1.4 MPa
Temperature-dependent operating pressure -0.95 bar … 14 bar
Temperature-dependent operating pressure -13.775 psi … 203 psi
Operating medium Compressed air to ISO 8573-1:2010 [7:-:-]
Note on operating and pilot medium Lubricated operation possible
Corrosion resistance class CRC 1 – Low corrosion stress
Ambient temperature -10 °C … 80 °C
Nominal torque 1.2 Nm
Tolerance for nominal tightening torque ±20%
Product weight 3.2 g
Type of mounting External hexagon, size 8 mm
Pneumatic connection, port 1 Male thread M5
Pneumatic connection, port 2 For tubing outside diameter of 4 mm
Colour of release ring Blue
Material housing Brass, nickel-plated
Material release ring POM
Material tubing seal NBR
Material tubing clamp component High-alloy stainless steel

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model QSM-M5-4-100, part number 130778, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies QSM-M5-4-100 as a push-in fitting under part number 130778. It lists size as Mini. Confirm the full variant before ordering.

Documentation Before Ordering

If the original part has an unclear suffix or incomplete marking, gather the available information before placing an order. Photos of the nameplate, the equipment manual, previous purchase records, and connection details can help narrow down the correct version. Keep any specification that remains uncertain open for confirmation instead of assuming a match.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

QSM-M5-4-100

Part number

130778

Product type

Push-In Fitting

Size

Mini

Nominal size

2.2 mm

Tubing insertion depth

11.5 mm

Type of seal on screwed plug

Sealing ring

Mounting position

Any

Design

Push-pull principle

Operating pressure complete temperature range

-0.095 MPa … 0.6 MPa