FESTO QSM-M5-6 153306 Push-In Fitting

The FESTO QSM-M5-6, part number 153306, is a push-in fitting. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: QSM-M5-6 Category: Tags: , , Brand:

Description

FESTO QSM-M5-6 153306 Push-In Fitting

The FESTO QSM-M5-6, part number 153306, is a push-in fitting. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Size: Mini.
  • Nominal size: 2.1 mm.
  • Tubing insertion depth: 12 mm.

Technical Data

Brand FESTO
Model QSM-M5-6
Part number 153306
Product type Push-In Fitting
Size Mini
Nominal size 2.1 mm
Tubing insertion depth 12 mm
Type of seal on screwed plug Sealing ring
Mounting position Any
Design Straight design
Design Push-pull principle
Operating pressure complete temperature range -0.095 MPa … 0.6 MPa
Operating pressure complete temperature range -0.95 bar … 6 bar
Operating pressure complete temperature range -13.775 psi … 87 psi
Temperature-dependent operating pressure -0.095 MPa … 1.4 MPa
Temperature-dependent operating pressure -0.95 bar … 14 bar
Temperature-dependent operating pressure -13.775 psi … 203 psi
Operating medium Compressed air to ISO 8573-1:2010 [7:-:-]
Note on operating and pilot medium Lubricated operation possible
Corrosion resistance class CRC 1 – Low corrosion stress
Ambient temperature -10 °C … 80 °C
Nominal torque 1.2 Nm
Tolerance for nominal tightening torque ±20%
Product weight 4.5 g
Type of mounting External hex SW10
Pneumatic connection, port 1 Male thread M5
Pneumatic connection, port 2 For tubing outside diameter of 6 mm
Colour of release ring Blue
Material housing Brass, nickel-plated
Material release ring POM
Material tubing seal NBR
Material tubing clamp component High-alloy stainless steel

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model QSM-M5-6, part number 153306, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies QSM-M5-6 as a push-in fitting under part number 153306. It lists size as Mini. Confirm the full variant before ordering.

Functional Check After Replacement

After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.

Order Detail Confirmation

To help prepare an accurate spare-parts order, please include the full model code, required quantity, and delivery destination in your enquiry. Photos or existing purchase records may be useful when a suffix or replacement choice is uncertain. Product details, payment method, and shipping arrangement can then be reviewed together before order processing.

Additional information

Brand

FESTO

Model

QSM-M5-6

Part number

153306

Product type

Push-In Fitting

Size

Mini

Nominal size

2.1 mm

Tubing insertion depth

12 mm

Type of seal on screwed plug

Sealing ring

Mounting position

Any

Design

Push-pull principle

Operating pressure complete temperature range

-0.095 MPa … 0.6 MPa