FESTO SDE5-D10-O-Q6E-P-K 542890 Pressure Sensor

The FESTO SDE5-D10-O-Q6E-P-K, part number 542890, is a pressure sensor. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: SDE5-D10-O-Q6E-P-K Category: Tags: , , Brand:

Description

FESTO SDE5-D10-O-Q6E-P-K 542890 Pressure Sensor

The FESTO SDE5-D10-O-Q6E-P-K, part number 542890, is a pressure sensor. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Measured variable: Relative pressure.
  • Measurement method: Piezoresistive pressure sensor.
  • Start value for pressure measuring range: 0 MPa 0 bar 0 psi.

Technical Data

Brand FESTO
Model SDE5-D10-O-Q6E-P-K
Part number 542890
Product type Pressure Sensor
Measured variable Relative pressure
Measurement method Piezoresistive pressure sensor
Start value for pressure measuring range 0 MPa 0 bar 0 psi
End value for pressure measuring range 1 MPa 10 bar 145 psi
Overload pressure 1.5 MPa 15 bar 217.5 psi
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible
Media temperature 0 °C…50 °C
Ambient temperature 0 °C…50 °C
Accuracy in ± % FS 0.5 %FS
Repetition accuracy in ± %FS 0.3 %FS
Temperature coefficient in ± %FS/K 0.05 %FS/K
Switching output PNP
Switching function Threshold value with xed hysteresis
Switching element function N/O contact
Hysteresis in ± %FS 2 %FS
Switch-on time 2 ms
Switch-off time 2 ms
Max. output current 100 mA
Voltage drop 1.8 V
Short circuit current rating Yes
Overload protection Yes
Operational voltage range DC 15 V…30 V
Reverse polarity protection For all electrical connections
Electrical connection 1, connection type Cable
Electrical connection 1, connector system Open end
Electrical connection 1, number of connections/cores 3
Cable length 2.5 m
Material cable sheath TPE-U(PUR)
Max. cable length 30 M
Type of mounting With accessories
Mounting position Any
Pneumatic connection QS-6
Product weight 47 g
Material housing Reinforced PA Reinforced POM
Material sealing ring Fluoro rubber NBR
Switching status indication Yellow LED
Setting options Teach-in
Setting range threshold value 0 %…100 %
Degree of protection IP40
Corrosion resistance class CRC 2 – Moderate corrosion stress

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model SDE5-D10-O-Q6E-P-K, part number 542890, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies SDE5-D10-O-Q6E-P-K as a pressure sensor under part number 542890. It lists measured variable as Relative pressure. Confirm the full variant before ordering.

Operating Conditions Check

Before selecting SDE5-D10-O-Q6E-P-K, confirm that the actual operating conditions fall within the specifications for the exact version being ordered. Relevant factors may include supply voltage, pressure, temperature, medium, and operating frequency, depending on the product type. Do not apply a series-wide maximum rating to an individual variant without checking its documentation.

International Delivery Options

We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.

Additional information

Brand

FESTO

Model

SDE5-D10-O-Q6E-P-K

Part number

542890

Product type

Pressure Sensor

Measured variable

Relative pressure

Measurement method

Piezoresistive pressure sensor

Start value for pressure measuring range

0 MPa 0 bar 0 psi

End value for pressure measuring range

1 MPa 10 bar 145 psi

Overload pressure

1.5 MPa 15 bar 217.5 psi

Operating medium

Compressed air to ISO 8573-1:2010 [7:4:4]

Note on operating and pilot medium

Lubricated operation possible

Media temperature

0 °C…50 °C