FESTO SDE5-V1-O-Q4-P-M8 527457 Pressure Sensor
The FESTO SDE5-V1-O-Q4-P-M8, part number 527457, is a pressure sensor. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO SDE5-V1-O-Q4-P-M8 527457 Pressure Sensor
The FESTO SDE5-V1-O-Q4-P-M8, part number 527457, is a pressure sensor. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Measured variable: Relative pressure.
- Measurement method: Piezoresistive pressure sensor.
- Start value for pressure measuring range: 0 MPa.
Technical Data
| Brand | FESTO |
|---|---|
| Model | SDE5-V1-O-Q4-P-M8 |
| Part number | 527457 |
| Product type | Pressure Sensor |
| Measured variable | Relative pressure |
| Measurement method | Piezoresistive pressure sensor |
| Start value for pressure measuring range | 0 MPa |
| Start value for pressure measuring range | 0 bar |
| Start value for pressure measuring range | 0 psi |
| End value for pressure measuring range | -0.1 MPa |
| End value for pressure measuring range | -1 bar |
| End value for pressure measuring range | -14.5 psi |
| Overload pressure | 0.5 MPa |
| Overload pressure | 5 bar |
| Overload pressure | 72.5 psi |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible |
| Media temperature | 0 °C … 50 °C |
| Ambient temperature | 0 °C … 50 °C |
| Accuracy in ± % FS | 0.5 %FS |
| Repetition accuracy in ± %FS | 0.3 %FS |
| Temperature coefficient in ± %FS/K | 0.05 %FS/K |
| Switching output | PNP |
| Switching function | Threshold value with fixed hysteresis |
| Switching element function | N/O contact |
| Hysteresis in ± %FS | 2 %FS |
| Switch-on time | 2 ms |
| Switch-off time | 2 ms |
| Max. output current | 100 mA |
| Voltage drop | 1.8 V |
| Short circuit current rating | Yes |
| Overload protection | Yes |
| Operational voltage range DC | 15 V … 30 V |
| Reverse polarity protection | For all electrical connections |
| Electrical connection 1, connection type | Plug |
| Electrical connection 1, connector system | M8x1, A-coded, to EN 61076-2-104 |
| Electrical connection 1, number of connections/cores | 3 |
| Electrical connection 1, type of mounting | Snap-locking Screw-type lock Not rotatable |
| Electrical connection 1, compatible type of mounting | Compatible with latching lock Compatible with rotatable screw-type lock |
| Electrical connection 1, connection pattern | 00991155 |
| Max. cable length | 30 M |
| Type of mounting | With accessories |
| Mounting position | Any |
| Pneumatic connection | QS-4 |
| Product weight | 19 g |
| Material housing | Reinforced PA Reinforced POM |
| Material sealing ring | Fluoro rubber NBR |
| Switching status indication | Yellow LED |
| Setting options | Teach-in |
| Setting range threshold value | 0 % … 100 % |
| Degree of protection | IP40 |
| Corrosion resistance class CRC | 2 – Moderate corrosion stress |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model SDE5-V1-O-Q4-P-M8, part number 527457, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies SDE5-V1-O-Q4-P-M8 as a pressure sensor under part number 527457. It lists measured variable as Relative pressure. Confirm the full variant before ordering.
Maintenance Inspection
Before replacing SDE5-V1-O-Q4-P-M8, examine the existing installation for issues that may affect the new part. Check the original label, ports, seals, fittings, cables, and mounting points as applicable. Finding a leak, worn connection, or loose contact before installation can help avoid repeating the same problem after replacement.
Order Detail Confirmation
To help prepare an accurate spare-parts order, please include the full model code, required quantity, and delivery destination in your enquiry. Photos or existing purchase records may be useful when a suffix or replacement choice is uncertain. Product details, payment method, and shipping arrangement can then be reviewed together before order processing.
Additional information
| Brand | FESTO |
|---|---|
| Model | SDE5-V1-O-Q4-P-M8 |
| Part number | 527457 |
| Product type | Pressure Sensor |
| Measured variable | Relative pressure |
| Measurement method | Piezoresistive pressure sensor |
| Start value for pressure measuring range | 0 psi |
| End value for pressure measuring range | -14.5 psi |






