FESTO SFAH-10U-Q6S-PNLK-PNVBA-L1 8058469 Flow Sensor
The Festo SFAH-10U-Q6S-PNLK-PNVBA-L1 (part number 8058469) is a flow sensor. Its product datasheet lists operating pressure as -0.9 bar … 10 bar and pneumatic connection as For tubing O.D. 6 mm.
Description
FESTO SFAH-10U-Q6S-PNLK-PNVBA-L1 8058469 Flow Sensor
The Festo SFAH-10U-Q6S-PNLK-PNVBA-L1 (part number 8058469) is a flow sensor. Its product datasheet lists operating pressure as -0.9 bar … 10 bar and pneumatic connection as For tubing O.D. 6 mm.
Key Features
- Operating pressure: -0.9 bar … 10 bar
- Pneumatic connection: For tubing O.D. 6 mm
- Pneumatic connection, outlet direction: Straight
- Start value for flow rate measuring range: 0.2 l/min
Technical Data
| Brand | FESTO |
|---|---|
| Model | SFAH-10U-Q6S-PNLK-PNVBA-L1 |
| Part number | 8058469 |
| Note on materials | RoHS compliant |
| Measured variable | Mass flow rate Volumetric flow rate |
| Flow direction | Unidirectional |
| Measuring principle | thermal |
| Measurement method | Heat transfer |
| Start value for flow rate measuring range | 0.2 l/min |
| End value for flow rate measuring range | 10 l/min |
| Operating pressure | -0.9 bar … 10 bar |
| Operating medium | Compressed air to ISO 8573-1:2010 [6:4:4] Nitrogen |
| Media temperature | 0 °C … 50 °C |
| Ambient temperature | 0 °C … 50 °C |
| Nominal temperature | 23 °C |
| Accuracy of flow rate | ± (2% o.m.v. + 1% FS) |
| Repetition accuracy offset in ± %FS | 0.2 %FS |
| Repetition accuracy span in ± %FS | 0.8 %FS |
| Temperature coefficient span in ± %FS/K | typ. 0.15%FS/K |
| Pressure influence range in ± %FS | Typ. 1 %FS |
| Switching output | 2 x PNP or 2 x NPN, switchable |
| Switching function | Window comparator Threshold value comparator Auto difference monitoring |
| Switching element function | NC or NO, switchable |
| Max. output current | 100 mA |
| Analogue output | 0 – 10 V 4 – 20 mA 1 – 5 V |
| Flow characteristic curve start value | 0 l/min |
| Flow characteristic curve end value | 10 l/min |
| Max. load resistance current output | 500 Ohm |
| Min. load resistance voltage output | 20 kOhm |
| Short circuit current rating | Yes |
| Overload protection | Available |
| Protocol | IO-Link® |
| IO-Link, Protocol version | Device V 1.1 |
| Operational voltage range DC | 22 V … 26 V |
| No-load supply current | ≤25 mA |
| Reverse polarity protection | For all electrical connections |
| Electrical connection 1, connection type | Plug |
| Electrical connection 1, connector system | Plug pattern L1J |
| Electrical connection 1, number of connections/cores | 4 |
| Electrical connection 1, connection pattern | 00995428 |
| Type of mounting | With accessories |
| Mounting position | Any |
| Pneumatic connection | For tubing O.D. 6 mm |
| Pneumatic connection, outlet direction | Straight |
| Product weight | 60 g |
| Material housing | Reinforced PA |
| Material in contact with the medium | Anodised wrought aluminium alloy Epoxy NBR Reinforced PA Silicon Silicon nitride High-alloy stainless steel |
| Protection against tampering | IO-Link® PIN code |
| Degree of protection | IP40 |
| Pressure drop | <5 mbar |
| Protection class | III |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model SFAH-10U-Q6S-PNLK-PNVBA-L1, part number 8058469, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists pneumatic connection, outlet direction as Straight for part number 8058469. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
Payment Arrangements
The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.
Additional information
| Brand | FESTO |
|---|---|
| Model | SFAH-10U-Q6S-PNLK-PNVBA-L1 |
| Part Number | 8058469 |
| Note on materials | RoHS compliant |
| Measured variable | Mass flow rate Volumetric flow rate |
| Flow direction | Unidirectional |
| Measuring principle | thermal |
| Measurement method | Heat transfer |
| Start value for flow rate measuring range | 0.2 l/min |
| End value for flow rate measuring range | 10 l/min |
| Operating pressure | -0.9 bar … 10 bar |









