FESTO SMT-8M-A-PS-24V-E-2,5-OE 574335 Proximity Sensor
The Festo SMT-8M-A-PS-24V-E-2,5-OE (part number 574335) is a proximity sensor. Its product datasheet lists ambient temperature as -40 °C … 85 °C and electrical connection 1, connection type as Cable.
Description
FESTO SMT-8M-A-PS-24V-E-2,5-OE 574335 Proximity Sensor
The Festo SMT-8M-A-PS-24V-E-2,5-OE (part number 574335) is a proximity sensor. Its product datasheet lists ambient temperature as -40 °C … 85 °C and electrical connection 1, connection type as Cable.
Key Features
- Ambient temperature: -40 °C … 85 °C
- Electrical connection 1, connection type: Cable
- Electrical connection 1, connector system: Open end
- Electrical connection 1, number of connections/cores: 3
Technical Data
| Brand | FESTO |
|---|---|
| Model | SMT-8M-A-PS-24V-E-2,5-OE |
| Part number | 574335 |
| Design | For T-slot |
| Based on standard | EN 60947-5-2 |
| Special characteristics | Oil-resistant |
| Note on materials | Free of halogen |
| Instructions on use | https://www.festo.com/Drive-Sensor-Overview |
| Measured variable | Position |
| Measuring principle | Magneto-resistive |
| Ambient temperature | -40 °C … 85 °C |
| Repetition accuracy | 0.2 mm |
| Switching output | PNP |
| Switching element function | N/O contact |
| Switch-on time | ≤1.3 ms |
| Switch-off time | ≤7.3 ms |
| Max. switching frequency | 130 Hz |
| Max. output current | 100 mA |
| Max. output current using mounting kits | 100 mA |
| Max. switching capacity DC | 2.8 W |
| Max. switching capacity DC using mounting kits | 2.8 W |
| Voltage drop | <1.5 V |
| Short circuit current rating | Yes |
| Overload protection | Yes |
| Rated operational voltage DC | 24 V |
| Operational voltage range DC | 5 V … 30 V |
| Reverse polarity protection | For all electrical connections |
| Electrical connection 1, connection type | Cable |
| Electrical connection 1, connector system | Open end |
| Electrical connection 1, number of connections/cores | 3 |
| Connection outlet orientation | In-line |
| Test conditions cable | Test conditions on request Torsional strength: > 300,000 cycles, ±270°/0.1 m Flexural strength: >50000 cycles, bending radius 5 mm Energy chain: > 5 million cycles, bending radius 28 mm |
| Cable length | 2.5 m |
| Cable characteristic | Suitable for energy chains/robot applications |
| Cable sheath colour | Grey |
| Material cable sheath | TPE-U(PUR) |
| Material insulating sheath | PP |
| Wire ends | Wire ferrule |
| Type of mounting | Screw-clamped Insertable in the slot from above |
| Max. tightening torque | 0.6 Nm |
| Mounting position | Any |
| Product weight | 29.1 g |
| Housing colour | Black |
| Material housing | Reinforced PA High-alloy stainless steel |
| Switching status indication | Yellow LED |
| Function reserve indication | Orange LED |
| Ambient temperature with moving cable | -20 °C … 85 °C |
| Degree of protection | IP65 IP68 IP69K |
| Suitability for the production of Li-ion batteries | Suitable for battery production with reduced Cu/Zn/Ni values (F1a) |
| Cleanroom suitability, measured according to ISO 14644-14 | Element installed statically, no meaningful evaluation possible according to ISO 14644-1 |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model SMT-8M-A-PS-24V-E-2,5-OE, part number 574335, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists electrical connection 1, connector system as Open end for part number 574335. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Application Review
When considering this proximity sensor for an industrial application, review the operating conditions of the equipment rather than relying on the product name alone. Confirm the required connections, available space, duty pattern, and surrounding environment. The final selection should follow the complete product specification and the machine manufacturer's requirements.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Brand | FESTO |
|---|---|
| Model | SMT-8M-A-PS-24V-E-2,5-OE |
| Part Number | 574335 |
| Design | For T-slot |
| Based on standard | EN 60947-5-2 |
| Special characteristics | Oil-resistant |
| Note on materials | Free of halogen |
| Instructions on use | |
| Measured variable | Position |
| Measuring principle | Magneto-resistive |
| Ambient temperature | -40 °C … 85 °C |









