FESTO SPAN-B2R-R18M-PNLK-PNVBA-L1 8035537 Pressure Sensor
The Festo SPAN-B2R-R18M-PNLK-PNVBA-L1 (part number 8035537) is a pressure sensor. Its product datasheet lists pneumatic connection as Male thread R1/8 Female thread M5 and start value for pressure measuring range as -0.1 MPa.
Description
FESTO SPAN-B2R-R18M-PNLK-PNVBA-L1 8035537 Pressure Sensor
The Festo SPAN-B2R-R18M-PNLK-PNVBA-L1 (part number 8035537) is a pressure sensor. Its product datasheet lists pneumatic connection as Male thread R1/8 Female thread M5 and start value for pressure measuring range as -0.1 MPa.
Key Features
- Pneumatic connection: Male thread R1/8 Female thread M5
- Start value for pressure measuring range: -0.1 MPa
- End value for pressure measuring range: 0.1 MPa
- Max. overload pressure: 5 bar
Technical Data
| Brand | FESTO |
|---|---|
| Model | SPAN-B2R-R18M-PNLK-PNVBA-L1 |
| Part number | 8035537 |
| Note on materials | RoHS compliant |
| Measured variable | Relative pressure |
| Measurement method | Piezoresistive pressure sensor |
| Start value for pressure measuring range | -0.1 MPa |
| Start value for pressure measuring range | -1 bar |
| Start value for pressure measuring range | -14.5 psi |
| End value for pressure measuring range | 0.1 MPa |
| End value for pressure measuring range | 1 bar |
| End value for pressure measuring range | 14.5 psi |
| Max. overload pressure | 5 bar |
| Overload pressure | 0.5 MPa |
| Overload pressure | 5 bar |
| Overload pressure | 72.5 psi |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] Inert gas |
| Note on operating and pilot medium | Lubricated operation possible |
| Media temperature | 0 °C … 50 °C |
| Ambient temperature | 0 °C … 50 °C |
| Accuracy in ± % FS | 1.5 %FS |
| Repetition accuracy in ± %FS | 0.3 %FS |
| Temperature coefficient in ± %FS/K | 0.05 %FS/K |
| Switching output | 2 x PNP or 2 x NPN, switchable |
| Switching function | Window comparator Threshold value comparator Auto difference monitoring |
| Switching element function | NC or NO, switchable |
| Max. output current | 100 mA |
| Analogue output | 0 – 10 V 4 – 20 mA 1 – 5 V |
| Max. load resistance current output | 500 Ohm |
| Min. load resistance voltage output | 20 kOhm |
| Short circuit current rating | Yes |
| Protocol | IO-Link® |
| IO-Link, Protocol version | Device V 1.1 |
| IO-Link, Profile | Smart sensor profile |
| IO-Link, Function classes | Binary data channel (BDC) Process data variable (PDV) Identification Diagnostics Teach channel |
| IO-Link, communication mode | COM2 (38.4 kBaud) |
| IO-Link, SIO-Mode support | Yes |
| Operational voltage range DC | 15 V … 30 V |
| Reverse polarity protection | For all electrical connections |
| Electrical connection 1, connection type | Plug |
| Electrical connection 1, connector system | Plug pattern L1J |
| Electrical connection 1, number of connections/cores | 4 |
| Electrical connection 1, connection pattern | 00995428 |
| Type of mounting | Front panel mounting With thread Via wall/surface bracket |
| Mounting position | Any |
| Pneumatic connection | Male thread R1/8 Female thread M5 |
| Product weight | 46 g |
| Material housing | Reinforced PA |
| Material in contact with the medium | Fluoro rubber High-alloy stainless steel |
| Protection against tampering | IO-Link® PIN code |
| Degree of protection | IP40 |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model SPAN-B2R-R18M-PNLK-PNVBA-L1, part number 8035537, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists end value for pressure measuring range as 0.1 MPa for part number 8035537. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Maintenance Inspection
Before replacing SPAN-B2R-R18M-PNLK-PNVBA-L1, examine the existing installation for issues that may affect the new part. Check the original label, ports, seals, fittings, cables, and mounting points as applicable. Finding a leak, worn connection, or loose contact before installation can help avoid repeating the same problem after replacement.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | SPAN-B2R-R18M-PNLK-PNVBA-L1 |
| Part Number | 8035537 |
| Note on materials | RoHS compliant |
| Measured variable | Relative pressure |
| Measurement method | Piezoresistive pressure sensor |
| Start value for pressure measuring range | -14.5 psi |
| End value for pressure measuring range | 1 bar |









