FESTO SPTE-P10R-Q3-V-2.5K 571486 Pressure Transmitter
The Festo SPTE-P10R-Q3-V-2.5K (part number 571486) is a pressure transmitter. Its product datasheet lists pneumatic connection as QS-3 and start value for pressure measuring range as 0 MPa.
Description
FESTO SPTE-P10R-Q3-V-2.5K 571486 Pressure Transmitter
The Festo SPTE-P10R-Q3-V-2.5K (part number 571486) is a pressure transmitter. Its product datasheet lists pneumatic connection as QS-3 and start value for pressure measuring range as 0 MPa.
Key Features
- Pneumatic connection: QS-3
- Start value for pressure measuring range: 0 MPa
- End value for pressure measuring range: 1 MPa
- Overload pressure: 1.5 MPa
Technical Data
| Brand | FESTO |
|---|---|
| Model | SPTE-P10R-Q3-V-2.5K |
| Part number | 571486 |
| Note on materials | RoHS compliant |
| Measured variable | Relative pressure |
| Measurement method | Piezoresistive pressure sensor |
| Start value for pressure measuring range | 0 MPa |
| Start value for pressure measuring range | 0 bar |
| Start value for pressure measuring range | 0 psi |
| End value for pressure measuring range | 1 MPa |
| End value for pressure measuring range | 10 bar |
| End value for pressure measuring range | 145 psi |
| Overload pressure | 1.5 MPa |
| Overload pressure | 15 bar |
| Overload pressure | 217.5 psi |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible |
| Media temperature | 0 °C … 50 °C |
| Ambient temperature | 0 °C … 50 °C |
| Accuracy in ± % FS | 3 %FS |
| Repetition accuracy in ± %FS | 0.3 %FS |
| Temperature coefficient in ± %FS/K | 0.05 %FS/K |
| Analogue output | 0 – 10 V |
| Rise time | 1 ms |
| Min. load resistance voltage output | 15 kOhm |
| Short circuit current rating | For all electrical connections |
| Operational voltage range DC | 18 V … 30 V |
| Reverse polarity protection | For all electrical connections |
| Electrical connection | Cable Open end |
| Cable length | 2.5 m |
| Type of mounting | With accessories |
| Mounting position | Any |
| Pneumatic connection | QS-3 |
| Product weight | 35 g |
| Material housing | Reinforced PA |
| Material sealing ring | Fluoro rubber NBR |
| Degree of protection | IP40 |
| Corrosion resistance class CRC | 2 – Moderate corrosion stress |
| Cleanroom suitability, measured according to ISO 14644-14 | Class 4 according to ISO 14644-1 |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model SPTE-P10R-Q3-V-2.5K, part number 571486, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists end value for pressure measuring range as 1 MPa for part number 571486. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
Payment Arrangements
The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.
Additional information
| Brand | FESTO |
|---|---|
| Model | SPTE-P10R-Q3-V-2.5K |
| Part Number | 571486 |
| Note on materials | RoHS compliant |
| Measured variable | Relative pressure |
| Measurement method | Piezoresistive pressure sensor |
| Start value for pressure measuring range | 0 psi |
| End value for pressure measuring range | 10 bar |








