FESTO SPTE-V1R-S6-B-2.5K 571470 Pressure Transmitter

The Festo SPTE-V1R-S6-B-2.5K (part number 571470) is a pressure transmitter. Its product datasheet lists pneumatic connection as Push-in sleeve QS-6 and start value for pressure measuring range as 0 MPa.

SKU: 571470 Category: Tags: , , Brand:

Description

FESTO SPTE-V1R-S6-B-2.5K 571470 Pressure Transmitter

The Festo SPTE-V1R-S6-B-2.5K (part number 571470) is a pressure transmitter. Its product datasheet lists pneumatic connection as Push-in sleeve QS-6 and start value for pressure measuring range as 0 MPa.

Key Features

  • Pneumatic connection: Push-in sleeve QS-6
  • Start value for pressure measuring range: 0 MPa
  • End value for pressure measuring range: -0.1 MPa
  • Overload pressure: 0.5 MPa

Technical Data

Brand FESTO
Model SPTE-V1R-S6-B-2.5K
Part number 571470
Note on materials RoHS compliant
Measured variable Relative pressure
Measurement method Piezoresistive pressure sensor
Start value for pressure measuring range 0 MPa
Start value for pressure measuring range 0 bar
Start value for pressure measuring range 0 psi
End value for pressure measuring range -0.1 MPa
End value for pressure measuring range -1 bar
End value for pressure measuring range -14.5 psi
Overload pressure 0.5 MPa
Overload pressure 5 bar
Overload pressure 72.5 psi
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible
Media temperature 0 °C … 50 °C
Ambient temperature 0 °C … 50 °C
Accuracy in ± % FS 3 %FS
Repetition accuracy in ± %FS 0.3 %FS
Temperature coefficient in ± %FS/K 0.05 %FS/K
Analogue output 1 – 5 V
Rise time 1 ms
Min. load resistance voltage output 15 kOhm
Short circuit current rating For all electrical connections
Operational voltage range DC 10 V … 30 V
Reverse polarity protection For all electrical connections
Electrical connection Cable
Open end
Cable length 2.5 m
Type of mounting Plug-in
Mounting position Any
Pneumatic connection Push-in sleeve QS-6
Product weight 35 g
Material housing Reinforced PA
Material sealing ring Fluoro rubber
Degree of protection IP40
Corrosion resistance class CRC 2 – Moderate corrosion stress
Suitability for the production of Li-ion batteries Suitable for battery production with reduced Cu/Zn/Ni values (F1a)
Cleanroom suitability, measured according to ISO 14644-14 Class 4 according to ISO 14644-1

Application Notes

Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.

Selection and Installation

Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.

Inquiry

For a quotation or replacement enquiry, provide model SPTE-V1R-S6-B-2.5K, part number 571470, quantity, destination and clear photos of the original unit when available.

Datasheet Selection Note

Festo lists end value for pressure measuring range as -0.1 MPa for part number 571470. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.

Operating Conditions Check

Before selecting SPTE-V1R-S6-B-2.5K, confirm that the actual operating conditions fall within the specifications for the exact version being ordered. Relevant factors may include supply voltage, pressure, temperature, medium, and operating frequency, depending on the product type. Do not apply a series-wide maximum rating to an individual variant without checking its documentation.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

SPTE-V1R-S6-B-2.5K

Part Number

571470

Note on materials

RoHS compliant

Measured variable

Relative pressure

Measurement method

Piezoresistive pressure sensor

Start value for pressure measuring range

0 psi

End value for pressure measuring range

-1 bar