FESTO VEAA-B-3-D11-F-A4-1R1 8046897 Proportional-Pressure Regulator
The Festo VEAA-B-3-D11-F-A4-1R1 (part number 8046897) is a proportional-pressure regulator. Its product datasheet lists valve function as 3-way proportional pressure regulator and pneumatic connection, port 1 as Flange.
Description
FESTO VEAA-B-3-D11-F-A4-1R1 8046897 Proportional-Pressure Regulator
The Festo VEAA-B-3-D11-F-A4-1R1 (part number 8046897) is a proportional-pressure regulator. Its product datasheet lists valve function as 3-way proportional pressure regulator and pneumatic connection, port 1 as Flange.
Key Features
- Valve function: 3-way proportional pressure regulator
- Pneumatic connection, port 1: Flange
- Pneumatic connection, port 2: Flange
- Pneumatic connection, port 3: Flange
Technical Data
| Brand | FESTO |
|---|---|
| Model | VEAA-B-3-D11-F-A4-1R1 |
| Part number | 8046897 |
| Valve function | 3-way proportional pressure regulator |
| Type of piloting | Direct |
| Type of reset | Mechanical spring |
| Type of actuation | Electrical |
| Mounting position | Any |
| Sealing principle | Soft |
| Ambient temperature | 0 °C … 50 °C |
| Media temperature | 5 °C … 50 °C |
| Storage temperature | -20 °C … 70 °C |
| Dimensions (W x L x H) | 15 mm x 61 mm x 66 mm |
| Pneumatic connection, port 1 | Flange |
| Pneumatic connection, port 2 | Flange |
| Pneumatic connection, port 3 | Flange |
| Material seals | NBR |
| Type of mounting | With through-hole With accessories |
| Inlet pressure 1 | 0 MPa … 1.1 MPa |
| Inlet pressure 1 | 0 bar … 11 bar |
| Inlet pressure 1 | 0 psi … 159.5 psi |
| Output pressure 2 | 0.005 MPa … 1 MPa |
| Output pressure 2 | 0.05 bar … 10 bar |
| Output pressure 2 | 0.725 psi … 145 psi |
| Standard nominal flow rate (standardised to DIN 1343) | ≥13 l/min |
| Standard nominal flow rate 2-3 | ≥7.5 l/min |
| Linearity | 0.5 %FS |
| Reproducibility | 0.4 %FS |
| Hysteresis | 0.25 %FS |
| Temperature cooefficient | 0.05 %/K |
| Total accuracy | 0.75 %FS |
| Product weight | 55 g |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] Inert gas |
| Note on operating and pilot medium | Lubricated operation not possible |
| Degree of protection | IP65 |
| KC mark | KC-EMV |
| Note on materials | RoHS compliant |
| Corrosion resistance class CRC | 2 – Moderate corrosion stress |
| Operational voltage range DC | 19 V … 29 V |
| Nominal operating voltage DC | 24 V |
| Residual ripple | 10% |
| Setpoint value | 4 – 20 mA |
| Signal range analogue output | 4 – 20 mA |
| Accuracy analogue output in ± %FS | 2 %FS |
| Max. electrical power consumption | 1 W |
| Reverse polarity protection | For all electrical connections |
| Short circuit current rating | For all electrical connections |
| Safety instructions | Safety position VEAA/VEAB: if the electrical power supply fails, the output pressure is maintained unregulated and may rise or fall – valve blocked. |
| Display type | LED |
| Electrical connection | M8x1 Plug To EN 60947-5-2 |
| Material housing | Reinforced PA |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model VEAA-B-3-D11-F-A4-1R1, part number 8046897, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists pneumatic connection, port 2 as Flange for part number 8046897. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
Order Detail Confirmation
To help prepare an accurate spare-parts order, please include the full model code, required quantity, and delivery destination in your enquiry. Photos or existing purchase records may be useful when a suffix or replacement choice is uncertain. Product details, payment method, and shipping arrangement can then be reviewed together before order processing.
Additional information
| Brand | FESTO |
|---|---|
| Model | VEAA-B-3-D11-F-A4-1R1 |
| Part Number | 8046897 |
| Valve function | 3-way proportional pressure regulator |
| Type of piloting | Direct |
| Type of reset | Mechanical spring |
| Type of actuation | Electrical |
| Mounting position | Any |
| Sealing principle | Soft |
| Ambient temperature | 0 °C … 50 °C |
| Media temperature | 5 °C … 50 °C |







