FESTO VL/O-3-1/4 9984 Pneumatic Valve
The FESTO VL/O-3-1/4, part number 9984, is a pneumatic valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO VL/O-3-1/4 9984 Pneumatic Valve
The FESTO VL/O-3-1/4, part number 9984, is a pneumatic valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Valve function: 3/2-way, monostable, open/closed.
- Type of actuation: Pneumatic.
- Construction width: 30.5 mm.
Technical Data
| Brand | FESTO |
|---|---|
| Model | VL/O-3-1/4 |
| Part number | 9984 |
| Product type | Pneumatic Valve |
| Valve function | 3/2-way, monostable, open/closed |
| Type of actuation | Pneumatic |
| Construction width | 30.5 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 800 l/min |
| pneumatic working port | G1/4 |
| Operating pressure | -0.095 MPa … 1 MPa |
| Operating pressure | -0.95 bar … 10 bar |
| Design | Poppet seat |
| Type of reset | Mechanical spring |
| Degree of protection | IP65 |
| Nominal size | 7 mm |
| Grid dimension | 32 mm |
| Exhaust-air function | Can be throttled |
| Sealing principle | Soft |
| Mounting position | Any |
| Type of piloting | Direct |
| Pilot air supply | External |
| Flow direction | Reversible |
| lap | Underlap |
| Pilot pressure | 0.1 MPa … 1 MPa |
| Pilot pressure | 1 bar … 10 bar |
| Switching time off | 26 ms |
| Switching time on | 7 ms |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 1 – Low corrosion stress |
| Storage temperature | -20 °C … 60 °C |
| Media temperature | -10 °C … 60 °C |
| Pilot medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Ambient temperature | -10 °C … 60 °C |
| Product weight | 230 g |
| Type of mounting | On manifold rail With through-hole |
| Pilot air port 110 | G1/8 |
| Pilot air port 12 | G1/8 |
| Pneumatic connection, port 1 | G1/4 |
| Pneumatic connection, port 11 | G1/4 |
| Pneumatic connection, port 2 | G1/4 |
| Pneumatic connection, port 3 | G1/4 |
| Pneumatic port 33 | G1/4 |
| Material seals | NBR |
| Material housing | Die-cast aluminium |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model VL/O-3-1/4, part number 9984, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies VL/O-3-1/4 as a pneumatic valve under part number 9984. It lists valve function as 3/2-way, monostable, open/closed. Confirm the full variant before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | VL/O-3-1/4 |
| Part number | 9984 |
| Product type | Pneumatic Valve |
| Valve function | 3/2-way, monostable, open/closed |
| Type of actuation | Pneumatic |
| Construction width | 30.5 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 800 l/min |
| pneumatic working port | G1/4 |
| Operating pressure | -0.95 bar … 10 bar |
| Design | Poppet seat |





