FESTO VUVG-L18-B52-T-G14-1P3 574430 Solenoid Valve
The FESTO VUVG-L18-B52-T-G14-1P3, part number 574430, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO VUVG-L18-B52-T-G14-1P3 574430 Solenoid Valve
The FESTO VUVG-L18-B52-T-G14-1P3, part number 574430, is a solenoid valve. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Valve function: 5/2-way, double solenoid.
- Type of actuation: Electrical.
- Valve size: 18 mm.
Technical Data
| Brand | FESTO |
|---|---|
| Model | VUVG-L18-B52-T-G14-1P3 |
| Part number | 574430 |
| Product type | Solenoid Valve |
| Valve function | 5/2-way, double solenoid |
| Type of actuation | Electrical |
| Valve size | 18 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 1380 l/min |
| pneumatic working port | G1/4 |
| Operating voltage | 24 V DC |
| Operating pressure | 0.15 MPa … 0.8 MPa |
| Operating pressure | 1.5 bar … 8 bar |
| Design | Piston gate valve |
| Degree of protection | IP40 IP65 With plug socket |
| Nominal size | 7.3 mm |
| Exhaust-air function | Can be throttled |
| Sealing principle | Soft |
| Mounting position | Any |
| Manual override | Detenting Non-detenting Concealed |
| Type of piloting | Piloted |
| Pilot air supply | Internal |
| lap | Overlap |
| Pilot pressure | 0.15 MPa … 0.8 MPa |
| Pilot pressure | 1.5 bar … 8 bar |
| Switching time reversal | 11 ms |
| Duty cycle | 100% |
| Max. positive test pulse with 0 signal | 700 µs |
| Max. negative test pulse with 1 signal | 900 µs |
| Characteristic coil data | 24 V DC: 1.0 W 24 V DC: low-current phase 0.3 W, high-current phase 1.0 W |
| Permissible voltage fluctuations | +/-10% |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Restrictions for environmental and media temperature | -5 – 50 °C Without holding current reduction |
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 2 – Moderate corrosion stress |
| Media temperature | -5 °C … 60 °C |
| Ambient temperature | -5 °C … 60 °C |
| Product weight | 164 g |
| Electrical connection | Via electrical sub-base |
| Type of mounting | Either: On manifold rail With through-hole |
| Pneumatic connection, port 1 | G1/4 |
| Pneumatic connection, port 2 | G1/4 |
| Pneumatic connection, port 3 | G1/4 |
| Pneumatic connection, port 4 | G1/4 |
| Pneumatic connection, port 5 | G1/4 |
| Material seals | HNBR NBR |
| Material housing | Wrought aluminium alloy |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model VUVG-L18-B52-T-G14-1P3, part number 574430, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies VUVG-L18-B52-T-G14-1P3 as a solenoid valve under part number 574430. It lists valve function as 5/2-way, double solenoid. Confirm the full variant before ordering.
Replacement Compatibility
Before ordering FESTO VUVG-L18-B52-T-G14-1P3 574430 Solenoid Valve as a replacement, compare the complete model code with the part currently installed. Check the connection style, mounting dimensions, electrical rating, and any series-specific suffixes. Parts that look alike may operate differently, so confirm the relevant specifications against the equipment requirements before treating them as interchangeable.
Order Detail Confirmation
To help prepare an accurate spare-parts order, please include the full model code, required quantity, and delivery destination in your enquiry. Photos or existing purchase records may be useful when a suffix or replacement choice is uncertain. Product details, payment method, and shipping arrangement can then be reviewed together before order processing.
Additional information
| Brand | FESTO |
|---|---|
| Model | VUVG-L18-B52-T-G14-1P3 |
| Part number | 574430 |
| Product type | Solenoid Valve |
| Valve function | 5/2-way, double solenoid |
| Type of actuation | Electrical |
| Valve size | 18 mm |
| Standard nominal flow rate (standardised to DIN 1343) | 1380 l/min |
| pneumatic working port | G1/4 |
| Operating voltage | 24 V DC |
| Operating pressure | 1.5 bar … 8 bar |






