GEMÜ / Bürkert Pharmaceutical Sanitary Diaphragm Valve Double-Layer PTFE + EPDM Composite Diaphragm
GEMÜ / Bürkert Pharmaceutical Sanitary Diaphragm Valve Double-Layer PTFE + EPDM Composite Diaphragm. Confirm fitment before ordering.
Description
GEMÜ / Bürkert Pharmaceutical Sanitary Diaphragm Valve Double-Layer PTFE + EPDM Composite Diaphragm. Match the original part to the required equipment configuration before requesting a replacement.
Technical Data
The photos show a DN65 GEMÜ annotation and EPDM marking. Confirm the original valve, construction and fastening; this does not verify Bürkert fitment or a pharmaceutical qualification.
Component and Equipment Reference
Series reference only. Fitment to the listed replacement is not independently verified. Bürkert Type 2030 / 2031 diaphragm valves; GEMÜ compatibility unverified. Equipment ratings are not replacement-part ratings.
Bürkert Diaphragm Family Material and Temperature Reference
| Diaphragm Material / Code | Medium Temperature | Sterilisation Limit |
|---|---|---|
| EPDM AD | −10 to +143 °C | Steam ≤150 °C, 60 min |
| FKM FF | 0 to +130 °C | No steam; dry heat ≤150 °C, 60 min |
| PTFE EA | −10 to +130 °C | Steam ≤140 °C, 60 min |
| Advanced PTFE EU | −5 to +143 °C | Steam ≤150 °C, 60 min |
| GYLON ER | −5 to +130 °C | Steam ≤140 °C, 60 min |
Bürkert Family Diaphragm Fastening Reference
| Diaphragm Size | PTFE / Advanced PTFE | EPDM / FKM / GYLON |
|---|---|---|
| ≤8 | Button | Button |
| 15 / 20 | Bayonet | Bayonet |
| ≥25 | Bayonet | Threaded |
Bürkert Family PTFE / EPDM Ordering Reference
| Diaphragm Size (Not DN) | PTFE / EPDM EA | Advanced PTFE / EPDM EU | GYLON / EPDM ER |
|---|---|---|---|
| 6 | — | — | 20130839 |
| 8 | 20093068 | 20093078 | 693175 |
| 15 | 20093069 | 20093079 | 693176 |
| 20 | 20093070 | 20093080 | 693177 |
| 25 | 20093071 | 20093082 | 693178 |
| 32 | 20093072 | 20093083 | 693179 |
| 40 | 20093073 | 20093084 | 693180 |
| 50 | 20093074 | 20093087 | 693181 |
| 65 | 20093075 | 20093088 | 586616 |
| 80 | 20093076 | 20093091 | 586617 |
| 100 | 20093077 | 20093092 | — |
Bürkert Family Elastomer Diaphragm Ordering Reference
| Diaphragm Size (Not DN) | EPDM AD | FKM FF |
|---|---|---|
| 6 | 20130838 | — |
| 8 | 688421 | 677684 |
| 15 | 688422 | 677685 |
| 15 BC | 693163 | 693164 |
| 20 | 688423 | 677686 |
| 20 BC | 693166 | 693167 |
| 25 | 688424 | 677687 |
| 32 | 688425 | 677688 |
| 40 | 688426 | 677689 |
| 50 | 688427 | 677690 |
| 65 | 688428 | 677691 |
| 80 | 688429 | 677692 |
| 100 | 688430 | 677693 |
Bürkert Family Diaphragm Assembly Torque — Nm, +10%
| Diaphragm Size | Non-VP EPDM / FKM | Non-VP PTFE / Advanced PTFE / GYLON | VP EPDM / FKM | VP PTFE / Advanced PTFE / GYLON |
|---|---|---|---|---|
| 6 | 1.1 | 1.1 | — | — |
| 8 | 2 | 2.5 | 2 | 2.5 |
| 15 | 3.5 | 4 | 3.5 | 4 |
| 20 | 4 | 4.5 | 4 | 4.5 |
| 25 | 5 | 6 | 7 | 8 |
| 32 | 6 | 8 | 8 | 10 |
| 40 | 8 | 10 | 12 | 15 |
| 50 | 12 | 15 | 15 | 20 |
| 65 | 20 | 30 | 20 | 30 |
| 80 | 30 | 40 | 30 | 40 |
| 100 | 40 | 50 | — | — |
Valve Family Construction and Function
Bürkert CLASSIC Types 2030 / 2031 are externally controlled 2/2-way diaphragm valves with pneumatic plastic piston actuators and diaphragm seals. Control function A is spring-closed, B spring-open and I externally controlled double-acting. The valves are bidirectional and can be self-draining when installed in the specified orientation. These are Bürkert family details, not confirmation of GEMÜ interchangeability or of the pictured replacement.
Material Selection and Temperature Boundary
Medium-temperature limits assume media that do not attack or swell the diaphragm. Do not use the diaphragm valve as a steam shut-off element. Extended sterilisation can alter life and maintenance intervals. Diaphragm life depends on material, medium, pressure, temperature, actuator size and pilot pressure for functions B and I. Valve-body limits and pressure–temperature derating also apply.
Fastening and Identification
Match actual valve type, diaphragm size, material marking and fastening; nominal connection DN is not necessarily diaphragm size. For diaphragm sizes 25 and above, use the compressor insert with threaded EPDM, and remove it for bayonet PTFE. Older material markings may differ. The two-layer backing and shield markings must both be checked.
Material Code Reference
AD, FF, EA, EU and ER are material codes; BC is a marking. EPDM AD is E04, FKM FF is F01. Size-8 EA and EU markings are PTFE L11 and L12 respectively; sizes 15–100 use EPDM E04 with PTFE P05 for EA or P06 for EU. ER is PTFE L08. Order numbers in these tables are Bürkert family references, not confirmed order codes for the photographed loose replacement.
Diaphragm Inspection and Storage
Install the relief bore at the lowest point for leak detection. Remove the actuator and diaphragm before welding or bonding. Tighten crosswise in stages; recheck after initial steam sterilisation. Inspect wear by 100,000 cycles or earlier for abrasive media; bulging PTFE can reduce flow and requires replacement. Store relaxed at +5 to +25 °C and below 65% relative humidity, avoiding condensation, UV, ozone and chemicals. Listed maximum storage/use periods are EPDM 7/3 years, FKM 7/4 years, and PTFE or advanced PTFE 10/3 years; elastomer backing life remains relevant. The pictured part is marked DN65 and GEMÜ, with EPDM visible on a tab. This does not establish Bürkert diaphragm size 65 or compatibility with the listed Bürkert ordering references. Confirm the installed valve and fastening before ordering.
Selection and Inquiry
Send the equipment nameplate, complete model, measurements and quantity. Check fastening, material and service conditions against the original part.
Browse Pump Repair Kits.
Spare Parts Records
Keeping a clear record of installed components can make future maintenance and purchasing more efficient. For this product, record the brand, full model code, important specifications, and equipment location. Update the record whenever a component or machine configuration changes, so the next replacement decision is based on current information.
Order Detail Confirmation
To help prepare an accurate spare-parts order, please include the full model code, required quantity, and delivery destination in your enquiry. Photos or existing purchase records may be useful when a suffix or replacement choice is uncertain. Product details, payment method, and shipping arrangement can then be reviewed together before order processing.









