IMI Norgren 0821097 8D G1/4 Electro-Mechanical Hydraulic Pressure Switch

IMI Norgren 0821097 is an 8D electro-mechanical hydraulic pressure switch with G1/4 connection and a 50-250 bar range for neutral liquid fluids.

Request a Quote

SKU: 0821097 Category: Tags: , Brand:

Description

IMI Norgren 0821097 is an 8D electro-mechanical hydraulic pressure switch with G1/4 connection and a 50-250 bar range for neutral liquid fluids.

Request a Quote

Key Features

  • Model: 0821097
  • Model: 0821097
  • Pressure port: G1/4
  • Switching range: 50-250 bar

Technical Data

Model 0821097
Model 0821097
Pressure port G1/4
Switching range 50-250 bar
Connection Pg 13.5 cable gland

Selection and Installation

Compare the complete part code, mounting arrangement and relevant operating requirements with the existing equipment before ordering. Isolate pressure and electrical supplies as applicable before replacement, and follow the machine manufacturer’s installation procedure.

Inquiry

Send the complete part number, required quantity and clear photos of the current part for version and availability confirmation.

0821097 Exact Model Data

Parameter Value
Pressure range 50-250 bar (725-3625 psi)
Pressure port G1/4
Switching difference, lower / upper range 12 / 16 bar
Electrical connection Cable gland, Pg 13.5
Body / seal Aluminium / FPM-PTFE
Drawing 1

8D Hydraulic Operating Conditions

Parameter Value
Medium Neutral liquid fluids
Operating principle Diaphragm
Repeatability +/-2% of final value, depending on regulating pressure
Hysteresis Fixed
Switching rate 20 cycles/min
Maximum viscosity 1000 mm^2/s
Ambient temperature -10 to +80 degrees C
Media temperature 0 to +80 degrees C
Protection IP64 for specified Form A and cable-gland configurations
Mass 0.4 kg

8D Silver-Contact Switching Capacity

Voltage AC resistive AC inductive, cos phi 0.7 DC resistive DC inductive, L/R approximately 10 ms
24 V 5 A 4 A 2 A 1 A
60 V 5 A 2.5 A 0.9 A 0.3 A
110 V 5 A 1.5 A 0.45 A 0.09 A
230 V 5 A 0.9 A 0.2 A 0.02 A

0821097 Drawing 1 Reference

Parameter Value
Height Approximately 135 mm
Width 33 mm
Side extent 72.5 mm
Mounting holes Diameter 5.3 mm
Connection labels G1/4 and Pg 13.5

Liquid-Service Selection

This is the hydraulic 8D version for neutral liquid fluids. Do not transfer the operating range from a pneumatic 8D or another pressure option.

Setpoint and Hysteresis

Setpoints should ideally be near the middle of the range. Switching pressure must remain within the listed range; the switching difference is fixed.

Contact Load and Temperature

Current ratings are referenced to +30 degrees C. At +70 degrees C permissible current is 50% of the tabulated value; inductive loads require suitable suppression.

Mounting and Wiring

Check the drawing for vertical mounting and bottom pressure-port access. The Form A terminal diagram should not be assumed to specify the cable-gland version's wiring.

Functional Check After Replacement

After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.

Payment Arrangements

The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.

Additional information

Model

0821097

Order code

0821097

Pressure port

G1/4

Switching range

50-250 bar

Connection

Pg 13.5 cable gland