IMI Norgren 100230804 Pneufit 8 mm Stem to 4 mm Tube Reducing Connector

IMI Norgren 100230804 is a metric reducing connector with an 8 mm outside-diameter stem and a push-in connection for 4 mm outside-diameter tubing. These are different interfaces, not two threaded ports.

Request a Quote

SKU: 100230804 Category: Tags: , Brand:

Description

The Pneufit catalogue lists the exact 100230804 model in its metric reducing connector dimensional table. The model-specific figures below retain the manufacturer metric values rather than converting the rounded inch figures.

Request a Quote

100230804 Configuration

Model 100230804
Connector form Metric reducing connector
Tube outside diameter 4 mm
Stem outside diameter 8 mm

Selection Notes

Match the 8 mm stem to the appropriate mating push-in connection and use 4 mm outside-diameter tubing at the tube connection. Confirm the required insertion depth and available layout space.

Exact 100230804 Configuration and Dimensions

Parameter Catalogue value
Stem outside diameter A (mm) 8
Tube outside diameter A1 (mm) 4
C (mm) 32
D (mm) 20.5
K diameter (mm) 9
S bore (mm) 3.5
T (mm) 14
Weight (g) 10

Pneufit 10 Series Media, Service and Materials

Parameter Catalogue value
Medium Compressed air; consult the manufacturer for other media
Operating pressure Vacuum 750 mmHg to 18 bar, dependent on tubing specification
Operating temperature -20 to +80 degrees C
Tube materials Nylon 11 or 12; polyurethane 95 durometer or above; LDPE
Body and collet Nickel-plated brass
O-ring VMQ-free NBR

Read the Exact Model Row

Use the 100230804 row and its drawing letters when checking the mating interface and mechanical envelope. Adjacent sizes and R/G thread versions have different dimensions.

Tube-Dependent Limits and Assembly

The operating-pressure limit depends on the selected tubing specification. The catalogue requires a square, burr-free tube end and full insertion through the O-ring to the tube stop. Check the complete assembly and the manufacturer instructions before use.

Functional Check After Replacement

After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.

Payment Arrangements

The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.

Additional information

Model

100230804

Connector form

Metric reducing connector

Tube outside diameter

4 mm

Stem outside diameter

8 mm